Photo by Ilya lix on Unsplash

Photo by Ilya lix on Unsplash

Configuring X Window input and output devices

Tailor-Made

Article from ADMIN 67/2022
By
Two command-line tools, xandr and xinput, let you optimize your X Window display from the terminal.

An X Window System provides several components to allow users to interact with a graphical interface. An X server lets applications, also known as X clients, use a graphical display within windows. The window manager determines the look and feel of such an interface, as well as takes care of how the windows are handled (e.g., enlarging, reducing, or closing them). A desktop manager, which is ultimately responsible for bringing order to this kind of graphical interface, displays icons, menus, panels, and other elements on the desktop.

Even though various graphical tools exist to optimally adapt your existing hardware to the X Window System, you can also do this from a terminal using command-line tools. You simply need to use the right tool to make the setting you need. In this article, I will show how to adjust some typical display settings from the terminal using xandr and xinput.

Setting up the Display

One problem that occurs time and time again relates to the correct display resolution. If you use several monitors or also use a projector, it is often difficult to determine the correct order of the devices so that you can use a mouse to easily switch between the windows of the different devices. You may also need to rotate the image shown on a display – for instance, if you have installed a projector upside down on the ceiling or want to use a monitor in portrait mode. To solve all of these problems, you can use the xrandr tool.

With xrandr, you can configure the X Window System's Resize and Rotate (RandR) extension to adjust the main window, which the X clients use for display purposes, to suit your needs. Using xrandr --listmonitors gives you an overview of all the monitors connected to the system and their current configurations:

xrandr --listmonitors
Monitors: 3
0: +*eDP-1 1920/309x1080/174+3000+0 eDP-1
1: +DP-2-2 1080/510x1920/287+0+0 DP-2-2
2: +DP-2-3 1920/598x1080/336+1080+0 DP-2-3

You can use xrandr -q to see which modes the individual devices support. You can then set the desired mode for a device as follows:

xrandr --output DP-2-2 --left-of eDP-1 --mode 1920x1080

This command ensures that the monitor DP-2-2, which is connected to the computer's DisplayPort, uses a resolution of 1920x1080 pixels and says that the device is located to the left of the laptop's internal display (eDP-1). You can easily move the mouse to the left to switch from the internal display to the external monitor. If you operate the monitor in portrait mode, simply extend the command to include the --rotate left or --rotate right option as follows:

xrandr --output DP-2-2 --rotate left --left-of eDP-1 --mode 1920x1080

The following command is useful if you use a projector connected to an HDMI interface and you want to display an inverted image:

xrandr --output HDMI-1 --rotate inverted --mode 1920x1080

Setting up the Mouse and Touchpad

Another popular X Window System setting is the configuration for natural scrolling. Often on Linux, the default setting for the connected mouse and the internal touchpad behaves like a scroll bar, which differs from the behavior on a device with a touchscreen. In other words, scrolling up causes the screen to scroll up, and scrolling down causes it to scroll down. However, on a smartphone or tablet touchscreen, it is the other way around, which means that many users will want to adjust this setting on their laptops or desktops.

In the X Window System, the libevent library is responsible for processing a user's input events and reacting to them accordingly. The configuration for the individual input devices relies on the xinput tool. An overview of the available devices can be displayed using the xinput list command (Figure 1).

Figure 1: With xinput list, you can see all available devices on your system.

The natural scrolling setting relates to the mouse and touchpad. All the available configuration settings for these devices can be displayed with the help of

xinput list-props <ID>

where you replace the ID with the device name (Figure 2). This is also recommended, since the ID is not static and may well change. The following two commands give you the same results for both the mouse and the touchpad:

xinput list-props 14
xinput list-props 'MOSART Semi. 2.4G Wireless Mouse'
xinput list-props 17
xinput list-props 'Elan Touchpad'
Figure 2: A device's configuration settings.

To change the setting, you can go back to the ID as well as to the name of the respective setting:

xinput set-prop 14 326 1
xinput set-prop 'MOSART Semi. 2.4G Wireless Mouse''libinput Natural Scrolling Enabled' 1
xinput set-prop 17 326 1
xinput set-prop 'Elan Touchpad' 'libinput Natural Scrolling Enabled' 1

The xinput command displays all input devices.

Persistent Settings

Keep in mind that the settings you make with xrandr and xinput are not persistent. To fix this problem, you have a variety of options. In the simplest case, you can create a startup file in which you enter the respective commands and then ensure that this file is called automatically by your desktop or window manager.

If you are looking for an approach that is independent of your desktop or window manager, you can also store the settings in the configuration file for the X server. Listing 1 shows an example for the libevent system. Another option is to create a script with the respective commands for each new X session. The advantage here is that you can also use the xrandr and xinput tools (and others) in this script without having to worry about the special syntax of the configuration file for the X Window System (see Listing 2).

Listing 1

/etc/X11/xorg.conf.d/99-libinput.conf

Section "InputClass"
     Identifier "MOSART Wireless Mouse"
     MatchProduct "MOSART Semi. 2.4G Wireless Mouse"
     Option "Natural Scrolling " "true"
EndSection
Section "InputClass"
     Identifier "Elan Touchpad"
     MatchProduct "Elan Touchpad"
     Option "Natural Scrolling" "true"
EndSection

Listing 2

/etc/X11/Xsession.d/99-libinput-xrandr.conf

xrandr --output eDP-1 --right-of DP-2-2 --mode 1920x1080
xrandr --output DP-2-2 --rotate left --left-of eDP-1 --mode 1920x1080
xinput set-prop 'MOSART Semi. 2.4G Wireless Mouse' 'libinput Natural Scrolling Enabled' 1
xinput set-prop 'Elan Touchpad' 'libinput Natural Scrolling Enabled' 1

Buy this article as PDF

Express-Checkout as PDF
Price $2.95
(incl. VAT)

Buy ADMIN Magazine

SINGLE ISSUES
 
SUBSCRIPTIONS
 
TABLET & SMARTPHONE APPS
Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

comments powered by Disqus
Subscribe to our ADMIN Newsletters
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs



Support Our Work

ADMIN content is made possible with support from readers like you. Please consider contributing when you've found an article to be beneficial.

Learn More”>
	</a>

<hr>		    
			</div>
		    		</div>

		<div class=