43%
11.06.2014
that the /etc/libvirt/libvirtd.conf configuration file does not have a listen_tcp = 1 line. In this case, libvritd would accept TCP connections from anyone – assuming the firewall on the host system does
43%
11.06.2014
not regarded as a fault, it is extremely impractical for test purposes. To improve the module's behavior, you need to add a SetEnv DAVBROWSER 1 to the Apache configuration for iRony in /etc/httpd/conf.d/iRony.conf
43%
08.10.2015
the startup scripts for the services, as well as configurations for logrotate and Postorius and HyperKitty in /etc/httpd/conf.d/. There you will find the configuration for the WSGI connection:
WSGIScript
43%
22.12.2017
specified in the test does not exist.
A parse_config resource lets you interpret configuration formats and look for certain values therein. If a specific parser resource does not already exist, mysql_conf
43%
18.02.2018
(remote syslog) [3], an open source tool for forwarding log messages to a central server using an IP network. It is very configurable using the /etc/rsyslog.conf file and the files in the /etc
43%
20.05.2014
through the system. Therefore, IPv6 routing must be activated up front. This is done with the command:
sysctl -w net.ipv6.conf.all.forwarding=1
This command can also be entered in the configuration file
43%
07.06.2019
lease period is infinite but might not be practical for your environment. Listing 1 shows an example dhcpd.conf file from the test environment.
Listing 1
Example DHCP Configuration File
43%
30.01.2024
properly
message.
Configuring the OSSEC Server
The next step is to tailor OSSEC to your requirements in the /var/ossec/etc/ossec.conf configuration file, for example, in Nano:
sudo nano /var/ossec/etc/ossec.conf
43%
09.01.2013
. To access the web front end from any host, just add the desired IP address or the following entry:
:host = 0.0.0.0
to the /etc/one/sunstone-server.conf configuration file. Without further changes, Sunstone
43%
13.02.2017
. The configuration file (/etc/designate/designate.conf) becomes cluttered very quickly because all Designate components need to share this file; therefore, the configuration is here for all the previously described
