100%
09.05.2018
in the main Ansible config file /etc/ansible/ansible.cfg
. The line I changed (I am using Ansible version 2.0.0.2, so your defaults might be slightly different) went from
#callback_whitelist = timer, mail ... 0 ... 0
99%
15.12.2017
Windows workstations for a particular company department, you would create a template for one of those workstations. If you’re responsible for implementing 100,000 IoT devices, you could use this domain ... 0 ... 0
87%
30.11.2025
enables X11 forwarding. Once logged in, echo your DISPLAY
variable:
$ echo $DISPLAY
The response should be similar to localhost:10.0
.
SSH automatically sets up the forwarding of your DISPLAY
variable ... 0
87%
30.11.2025
/share/doc/kernel-doc/Documentation/networking/bonding.txt
).
Listing 5
ifcfg-bond0
01 DEVICE=bond0
02 IPADDR=192.168.10.200
03 NETMASK=255.255.255.0
04 ONBOOT=yes
05 USERCTL=no
06 BONDING_OPTS="mode=1 miimon=100"
When the system is running, the /proc ... 0
87%
30.11.2025
System (output follows)
09 DOWNLOAD PKGS FILES XFER (MB)
10 Completed 20/20 3021/3021 42.55/42.55
11
12 PHASE ... 0
87%
30.11.2025
such as the codec, the open port (in the m
header), and the IP address or name of the hosts.
Listing 1
Invite Request with SIP and SDP
01 INVITE sip:bob@biloxi.com SIP/2.0
02 Via: SIP/2.0/UDP pc33 ... 0
87%
30.11.2025
, with the Enterprise version adding just a handful of additional features.
In contrast to other high-end commercial products, TOPdesk is 100% web based (with the exception of a few administrative functions). It runs ... 0
86%
30.11.2025
10 seconds to complete, each call will cost the marketer 0.06 cents in line rental and 20 cents per charge unit. Although this might not seem like a large expense, the relative ineffectiveness of spam ... 0
85%
04.12.2024
Rubén Llorente ... the downloaded image to it
qm create 100 --name openbsd-master --memory 1024 --agent 1,type=isa --scsihw virtio-scsi-single --boot order='scsi0' --net0 virtio,bridge=vmbr0 --serial0 socket --vga serial0
qm set 100
84%
25.09.2023
Rubén Llorente ... a LAN with devices that use network 192.168.101.0/24 and another with a LAN that uses 192.168.100.0/24, you would set the router of the first to direct any internal traffic to the second over a Wire
