Search

cache SSD/Hard disks: two SATA-II Intel SSD 710 Series (100GB)/six SAS Toshiba MK2001TRKB 6GBps (2TB) Network: 4x Intel (IGB) 1Gbps Operating system: openSUSE 12.1 and Tumbleweed, kernel 3.1.10 and 3

: AuthenticAMD Speed(MHz): 2812.629 Cores: 4 Siblings: 4 Nodes: 1 13 # Kernel: 2.6.32-220.4.1.el6.x86_64 Memory: 7540044 Swap: 14 # NumDisks: 2 DiskNames: sdb sda 15 # NumNets: 2 NetNames: lo: eth0:100 16 # Num

server, such as Xming [3] or the Mocha X Server [4]. Listing 2 Xeyes Test 01 $ xeyes & 02 03 [1] 4342 04 $ X connection to localhost:10.0 broken (explicit kill or server shutdown). 05 [1 ... 0

Switch(config)# dot1x system-auth-control 06 Switch(config)# radius-server host 10.1.1.1 key V@rYseCre!t 07 Switch(config)# interface fastethernet0/1 08 Switch(config-if)# switchport mode access 09 Switch ... Mobile devices require special security considerations. In combination with IEEE 802.1X, Network Access Protection can ensure that mobile devices maintain the necessary security standards before they ... NAP with 802.1X ... Port-based access protection with NAP and 802.1X

/share/doc/kernel-doc/Documentation/networking/bonding.txt ). Listing 5 ifcfg-bond0 01 DEVICE=bond0 02 IPADDR=192.168.10.200 03 NETMASK=255.255.255.0 04 ONBOOT=yes 05 USERCTL=no 06 BONDING_OPTS="mode=1 miimon=100" When the system is running, the /proc ... 0

]) 03 guesses: 0 time: 0:00:00:01 100% c/s: 9433 trying: hken1900 Finally, the brute force attack might be your only refuge if passwords are more complex. The sub-modes allow you to specify which

Size Used Priority 03 /dev/sda5 partition 4085756 52864 -1 The most common configuration is a dedicated swap partition (type 0x82), but you can use swap files hosted in a general

100 0.067 95 23 5 10 99 0.099 96 22 6 20 94 0.210 97 22 6 Unfortunately

is as follows: tc filter add dev $DEV protocol ip parent 1:0 prio 100 u32 match ip $DIR 12.34.56.78 flowid 1:12 You'll be glad to know the filter's config is much simpler than the classes or the qdisc

in the cgroup. You can then use the tc with the group. Start by defining the classID for the cgroup: echo 0x00100001 > /cgroup/net_cls/libvirt/qemu/guest/net_cls.classid This hexadecimal number comprises two