© zentilia, 123RF.com
Link aggregation boosts securityand increases throughput
Thick Wires
Link aggregation means grouping connections to link multiple connections between two components (switches, servers, storage systems, etc.) and view them logically as a single connection (Figure 1). As a rule, a system administrator would use this solution to combine two to four individual connections, which are then no longer considered individual links but a link aggregation group (LAG). Although most managed switches support link aggregation, you should look at the data sheet to be sure. The same is true for IP-based iSCSI and NFS/CIFS storage systems. Servers need at least two network cards and software support from the operating system or the network card driver for link aggregation.
Figure 1: Multiple links are grouped to form a link aggregation group (LAG).
Conditions
Before multiple links can be grouped in a LAG, some prerequisites must be met. All links must
- be in full duplex mode,
- have the same data rate (usually 1 Gbps),
- be parallel point-to-point connections
- always terminate on exactly one switch or server at the end points.
Aggregation with multiple switches on one end, such as split multilink trunking (SMLT) by Nortel, is not possible with link
...
Buy this article as PDF
(incl. VAT)
Buy ADMIN Magazine
US / Canada
UK / Australia
Related content
-
Increasing Throughput with Link Aggregation
For once, admins and users agree: They want more resiliency and higher bandwidth on the network. Link aggregation, in line with IEEE 802.1ax b-2008, offers both – with some minor restrictions.
-
Redundant network connections with VMware ESX
Virtualization doesn't necessarily provide protection against system failure if the network is a single point of failure. We explain how to set up redundant network connections for virtual machines running VMware ESX. -
Link aggregation with kernel bonding and the Team daemon
The Linux world has different implementations for integrating multiple network cards: kernel old-timer ifenslave and the younger libteam. -
Link Encryption with MACsec
MACsec encrypts defined links with high performance and secures Layer 2 protocols between client and switch or between two switches.
Subscribe to our ADMIN Newsletters
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Most Popular
Support Our Work
ADMIN content is made possible with support from readers like you. Please consider contributing when you've found an article to be beneficial.
