VTP for VLAN management

Mod Comms

VTP Version 3

To overcome the false update issue, VTP version 3 [2] has introduced the primary and secondary server concept. Enter the vtp version 3 command to tell the switches to use VTP version 3. The vtp mode server command only sets a switch to indicate a secondary server. However, all VTP version 3 switches do not accept a VLAN update unless the update is generated by a primary server. The only way to change the VLAN database is first to promote a secondary server to a primary server with the vtp primary vlan command (Listing 6), modify the VLAN database, and finally demote it back to a secondary server for safety. By changing to transparent mode and then back to server mode, the primary server will act as a secondary server again.

Listing 6

Promoting Secondary Server

SW1#vtp primary vlan
This system is becoming primary server for feature vlan
No conflicting VTP3 devices found.
Do you want to continue? [confirm]
SW1#
SW1#show vtp status
VTP Version                   : 3 (capable)
VTP version running           : 3
VTP Domain Name               : admin
VTP Pruning Mode              : Disabled
VTP Traps Generation          : Disabled
Device ID                     : aabb.cc00.0400
Feature VLAN:
--------------
VTP Operating Mode                : Primary Server
Number of existing VLANs          : 23
Number of existing extended VLANs : 2
Configuration Revision            : 2
<--Output Omitted-->

Some other features are also added in version 3; for example, increasing the VLAN propagating range from 1-1005 in previous versions to 1-4095. VTP version 3 also supports propagating Multiple Spanning Tree Protocol (MSTP) instance tables.

VTP Pruning

The VTP pruning feature can automatically block unnecessary traffic that passes through trunk links to avoid wasting bandwidth. In the scheme depicted in Figure 4, SW3 does not need any VLAN traffic other than VLAN10, so it notifies SW2 to prune all other VLAN traffic. SW2 only needs VLAN30 traffic, but it combines the SW3 request and tells SW1 to prune all VLANs other than VLAN10 and VLAN30.

Figure 4: Enabling VTP pruning can reduce unnecessary bandwidth usage on the trunk link.

The configuration is surprisingly easy. Just go to the VTP server and enter the command

vtp pruning

and all switches in the VTP domain will enable the pruning feature.

Conclusion

VTP is a convenient tool for VLAN management, but after hearing too many sad stories about the false database update incident, I strongly recommend using version 3 only, rather than version 1 or 2. VTP is a Cisco proprietary protocol, but you might consider an equivalent open standard called Generic VLAN Registration Protocol (GVRP) [3] for non-Cisco products.

The Author

Jan Ho is a network engineer living in Hong Kong. He writes network tutorials at https://www.jannet.hk/en/.

Buy this article as PDF

Express-Checkout as PDF
Price $2.95
(incl. VAT)

Buy ADMIN Magazine

SINGLE ISSUES
 
SUBSCRIPTIONS
 
TABLET & SMARTPHONE APPS
Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

  • Segmenting networks with VLANs
    Network virtualization takes very different approaches at the software and hardware levels to divide or group network resources into logical units independent of the physical layer. It is typically a matter of implementing secure strategies. We show the technical underpinnings of VLANs.
  • OpenStack installation with the Packstack installer
    At first sight, an OpenStack installation might seem like rocket science, but you can launch a fully functional cloud environment with minimal effort in a relatively short time with the Packstack automation tool.
  • Virtual switching with Open vSwitch
    Virtualization with Vmware, KVM, and Xen is here to stay. But up to now, no virtual switch has supported complex scenarios. Open vSwitch supports flows, VLANS, trunking, and port aggregation just like major league switches.
  • Virtual networks with Hyper-V in Windows Server 2016
    Microsoft provides some interesting virtualization features in current and future versions of Windows Server. You can connect or isolate virtual machines, and Windows Server 2016 even supports virtual switches.
  • Affordable hardware switch for SDN
    Most OpenFlow-ready hardware switches are prohibitively expensive if you just want to set up a small-scale test lab. Northbound Networks has stepped in with a Kickstarter campaign, filling the gap with the Zodiac FX switch.
comments powered by Disqus
Subscribe to our ADMIN Newsletters
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs



Support Our Work

ADMIN content is made possible with support from readers like you. Please consider contributing when you've found an article to be beneficial.

Learn More”>
	</a>

<hr>		    
			</div>
		    		</div>

		<div class=