20%
07.11.2023
, mount the new filesystem and check it with the df
command. The Ubuntu 22.04 example can illustrate this process (Listing 6).
Listing 6: LV Block Device for Filesystem
$ sudo mkdir /mnt/test
$ sudo mkfs.ext4
20%
30.11.2025
-certs, make, gcc, and g++. The certificates from ssl-cert will be required later.
According to the how-to http://1, Chef prefers RubyGems version 1.3.6 or newer, but not 1.3.7. This version contains a bug
20%
10.07.2017
with the original Raspberry Pi Model A, ranging from two to more than 250 nodes. That early 32-bit system had a single core running at 700MHz with 256MB of memory. You can build a cluster of five RPi3 nodes with 20
20%
03.02.2022
,32
1,33
2,34
3,35
4,36
5,37
6,38
7,39
8,40
9,41
10,42
11,43
12,44
13,45
14,46
15,47
16,48
17,49
18,50
19,51
20,52
21,53
22,54
23,55
24,56
25,57
26,58
27,59
28,60
29,61
30,62
31,63
The lstopo tool
20%
12.02.2014
.py
CPU ALL: 1.0 %
CPU0 4.1%
CPU1 2.0%
CPU2 0.0%
CPU3 0.0%
CPU4 0.0%
CPU5 0.0%
CPU6 0.0%
CPU7 2.0%
CPU ALL:
user: 0.7% nice: 0.0%
system: 0.2% idle
20%
25.02.2013
.00 0.00
01/31/2013 09:56:03 AM
avg-cpu: %user %nice %system %iowait %steal %idle
6.00 0.00 2.00 0.50 0.00 91.50
Device: rrqm/s wrqm/s r/s w/s rMB
20%
21.01.2021
. The initial processor speed was 300MHz. Future processors used 450, 600, and even 675MHz. Similar to the T3D, the T3E could scale from 8 to 2,176 PEs, and each PE had between 64MB and 2GB of memory. The T3D
20%
07.04.2022
,BROADCAST,RUNNING,MULTICAST> mtu 1460
inet 10.0.0.2 netmask 255.255.255.255 broadcast 0.0.0.0
inet6 fe80::bfd3:1a4b:f76b:872a prefixlen 64 scopeid 0x20
ether 42:01:0a:80:00:02 txqueuelen 1000
20%
24.02.2022
.255.255.255 broadcast 0.0.0.0
inet6 fe80::bfd3:1a4b:f76b:872a prefixlen 64 scopeid 0x20
ether 42:01:0a:80:00:02 txqueuelen 1000 (Ethernet)
RX packets 11919 bytes 61663030 (58.8 Mi
20%
20.06.2012
is to find out whether it runs on the master node when it is booted by using the chkconfig
command:
[root@test1 etc]# chkconfig --list
...
nfs 0:off 1:off 2:off 3:off 4:off 5:off 6
