24%
09.03.2025
, but almost all of these articles come to Linux with a specific use case in mind. It could be database, or web usage, or coding, or computer-aided engineering (CAE), or any number of directions, but I haven
24%
20.11.2013
. In my case, I followed the installation instructions for CentOS on my CentOS 6.4 system. The instructions are very good and very accurate – be sure you read all of it before trying to install s3q
l
24%
04.02.2014
, and if these pg_dump
transactions were not synchronized, data consistency between the tables could not be guaranteed. In this case, it would be possible for the concurrent processes to store new data in one
24%
06.05.2014
automatically, for example, using Amazon API AWS autoscaling. In this case, the cloud uses CloudWatch to monitor the load on the individual instances. Once the conditions set by the administrator are met, AWS
24%
05.06.2013
want to go larger?
Send in the Clouds
Although you might not be a fan of the word “cloud,” the concepts behind it have utility. In the case of HPC, clouds allow you to spin up a cluster fairly quickly
24%
03.01.2013
, with the possible exception of Simulink and GUI Matlab code. They have varying degrees of success with Matlab compatibility, but all are inherently serial applications.
Serial in this case means that the vast
24%
25.02.2013
-m /dev/md1 2 100 > iostat.out
The number of samples and the sampling rate (last two numbers) can be anything. Also the device, which in this case is /dev/md1
(a software RAID-1 device consisting
24%
23.07.2013
by downtime. In the case of PowerDNS, that means two or three DNS servers; if you are using a database back end, you should not have a single back end for your entire infrastructure; rather, you should match
24%
08.08.2014
. In some cases, the analysis is performed with a variety of starting points or conditions. Sometimes you make different assumptions in the analysis or use different analysis techniques, resulting in the need
24%
27.08.2014
file (-m trace
). In this case, the tar file defaults to sdb1.tar
. The command traces the /dev/sdb1
device (-d /dev/sdb
) and gathered data for 660 seconds (-r 660
). The amount of time was a bit
