42%
30.11.2025
New-ADGroup
12 Remove-ADGroup
13 Remove-ADGroupMember
14 Remove-ADPrincipalGroupMembership
15 Set-ADGroup
The following command lists the members of the NYC_MarketingGG
group by their Common
42%
30.11.2025
user
15 daemongroup = 'nogroup' # Has to be identical to the clamav daemon group sein!
Two user groups (defined by filtergroups = 2
) each need a dansguardianfn.conf
file. Both contain just
42%
30.11.2025
starter kit: https://www.icinga.org/2010/09/22/starter-kit-icinga-virtual-appliance/
Zabbix appliance: http://www.vmware.com/appliances/directory/353
42%
30.11.2025
capture or display filters. The capture filter would look like this:
port 22
Then start capturing, initiate an SSH login at the console, and in the Analyze
menu, select Follow TCP Stream
. The result
42%
30.11.2025
to popular ports, such as 80 (HTTP) or 22 (SSH), and pings. If Portbunny does not register a response to a port request, but the trigger packet reaches the target, it tags the port as filtered. Using Portbunny
42%
30.11.2025
16 into offset hole 22, your new furniture might never live up to your expectations. Additionally, integrating the furniture into an existing room could be a challenge. Forgetting that the new surround
42%
30.11.2025
bandwidth $BAND rate 632Mbit allot 1514 maxburst 20 avpkt $PKT \cell 8 weight 64Mbit prio 7
14 # Then create your "child" class 1:12
15 tc class add dev $DEV parent 1:1 classid 1:12 cbq bandwidth $BAND rate
42%
30.11.2025
PKCS#12 file [8] to the card using:
pkcs15-init --store-private-key tscherf.p12 --format pkcs12 --auth-id 01
The PKCS#12 file contains both the public key and private key. If you have a user
42%
30.11.2025
's with all the colons?
Well, put simply, IPv4 addresses are short, so writing out the entire address is easy. With IPv6, however, you get something like 1.2.3.4.5.6.7.8.9.234.25.198.221.82.15.16. To make
42%
30.11.2025
' => '',
15 // 'smtphost' => 'smtp.example.com',
16 // 'smtpport' => 25,
17 'cache' => false,
18 );
Initially, only the /var/www/webmail/imp/config/backends.php file exists, which you
