31%
05.02.2023
it comes to hardware sizing, you have a wide choice; you can run a small test database with PostgreSQL or MySQL on a shared core with a virtual (v)CPU and 614MB of RAM. On the other side of the scale
31%
03.12.2015
in the container configuration. The following example allows 100MB of RAM and 100MB of swap space:
lxc.cgroup.memory.limit_in_bytes = 100M
lxc.cgroup.memory.memsw.limit_in_bytes = 200M
Table 2 [7] provides
31%
11.02.2016
] and unpack to your hard disk, revealing the lightweight otto program, which weighs in at just 15MB. Although you can call it directly – there is no need to install – HashiCorp does recommend adding otto
31%
30.01.2020
and needs 900MB of storage space (Figure 1). If you have fast Internet access on the system on which you call the fai-diskimage command, the process is also quick. It hardly takes a minute for the finished
31%
25.03.2020
0 1048575 sr0
With the parted utility, you can create a single partition on each entire HDD:
$ for i in sdb sdc sdd sde; do sudo parted --script /dev/$i mklabel gpt mkpart primary 1MB 100
31%
04.08.2020
:
resource-definition create --layer-list storage LocalData
Now, add a single volume of 150MB to the resource definition named LocalData
:
volume definition create LocalData 150m
Finally, on the cluster
31%
14.11.2013
of the virtual computer models; their hardware configurations follow on the right. For example, the computer named m1.small only has one CPU and 256MB of RAM. The free/max column is also interesting: The number
31%
05.08.2024
:
curl git pkg-config
0 upgraded, 3 newly installed, 0 to remove and 1 not upgraded.
Need to get 3,409 kB of archives.
After this operation, 19.5 MB of additional disk space will be used.
Get:1 http
31%
01.06.2024
is, the fewer vulnerabilities it is likely to have. According to the report, container images smaller than 100MB had 4.4 high or critical vulnerabilities, versus 42.2 for images between 250 and 500MB
31%
07.10.2025
, the current version of the agent requires 36MB of RAM, 63MB of memory space, and a network bandwidth of 237bps (uplink) and 79bps (downlink), which enables Datadog to collect CPU utilization, I/O rates, TCP
