Search

], where X is the size of the reserved area in megabytes and Y specifies the start address. If you omit the second parameter or set it to 0M, the system automatically selects an appropriate location ... 2012

were run on a virtual system (using ESX as the hypervisor) with fixed reservations for CPU and memory. To be more precise, I used a virtual CPU running at 1.5GHz and with 512MB of RAM in the virtual ... 2012

, and you are given minimum, maximum, and average values for the speed of ICMP responses. In addition to performing the simple ping test, you can access a freely configurable website, or transfer 1MB of test ... 2012

the older UFS filesystem rather than ZFS. Built-In RAID With FreeNAS, you can set up software RAID levels 0, 1, 3, and higher, but again, you need to be aware that hardware RAIDs are faster and safer ... Setting up your own NAS with FreeNAS 8.0.2 ... 2012

for this article, my required space was approximately 300MB and just under 100MB for the temporary staging space. Keep the temporary staging directory intact for future installations and customizations. The disk ... 2012

that gives admins a convenient option for testing the features supported by the new version of Samba 4. Version 0.1 first aired at CeBIT last year and has been officially downloadable since May 2012; however ... Shortly after the Samba team finalized Samba 4 in December 2012, SerNet and Univention integrated the new Samba into their appliances that give administrators an easy way to set up and test a Samba 4

time: 11.79 secs Data transferred: 2.47 MB Response time: 0.22 secs Transaction rate: 35.79 trans/sec Throughput: 0

disk reads: 1306 MB in 3.00 seconds = 434.77 MB/sec federico@cybertron:~$ sudo hdparm -W /dev/sdb /dev/sdb: write-caching = 1 (on) federico@cybertron:~$ sudo hdparm -W 0 /dev/sdb /dev/sdb: write

, integrated AMD Radeon HD 6320, integrated Integrated/SoC Graphics memory Up to 512MB 128MB 256MB 384MB 256MB RAM 1GB 1GB 2GB

. The single-stage hierarchy starts with area 0, which is the backbone area. Each further area must be connected via a router, even if it does not need to exist physically in a production environment. Customized