21%
21.08.2012
Listing 4: Installing ganglia-metad into the Master Node
[root@test1 RPMS]# yum install ganglia-gmetad-3.4.0-1.el6.i686.rpm
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading
21%
19.05.2014
.325
56.328
58.231
67.588
14,100
2,860
SSHFSM OPT3
54.595
61.111
67.107
67.379
13,958
2,670
SSHFS OPT4
78.600
21%
17.02.2015
://developer.nvidia.com/jetson-tk1
Odroid-XU3
Android 4.4, Linux
Samsung Exynos5422
Quad ARM Cortex-A15 @2.0GHz (32KB/32KB/2MB), Quad ARM Cortex-A7 @1.4GHz (32KB/32KB/512KB)
Mali-T628 MP6
21%
02.08.2021
with a different size (Listing 3). The output from the second command verifies that the RAM drives were created.
Listing 3
Adding RAM Drive of 32MB
$ sudo rapiddisk -a 32
rapiddisk 7.2.0
Copyright
21%
20.06.2012
is to find out whether it runs on the master node when it is booted by using the chkconfig
command:
[root@test1 etc]# chkconfig --list
...
nfs 0:off 1:off 2:off 3:off 4:off 5:off 6
21%
28.06.2011
-Manage:
novammanage user admin rwartala
This process creates an access key and a security key:
export EC2_ACCESS_KEY=713211a477a154470fUU
ae543346b52e30a0e
export EC2_SECRET_KEY=244de6a188aa344e12UU
9521003ac756abbdf
21%
21.08.2012
| 951 B 00:00
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package gkrellm-daemon.x86_64 0:2.3.5-3.el6 will be installed
--> Processing Dependency: libsensors
21%
05.11.2018
nodes, and make sure to do this as a user and not as root.
3. To make life easier, use shared storage between the controller and the compute nodes.
4. Make sure the UIDs and GIDs are consistent
21%
13.12.2018
In previous articles, I examined some fundamental tools for HPC systems, including pdsh [1] (parallel shells), Lmod environment modules [2], and shared storage with NFS and SSHFS [3]. One remaining
21%
21.08.2012
in the VNFS by appending the following lines to the file:
update-hz 3
port 19150
allow-host 10.1.0.250
fs-interval 2
nfs-interval 16
inet-interval 0
Then, on the master node (i.e., IP address 10.1.0
