15%
19.02.2013
interface eth3
09 ip ospf message-digest-key 1 md5 hallo123
10 !
11 !
12 router ospf
13 redistribute connected
14 network 172.16.1.0/24 area 0.0.0.0
15 network 172.17.0.0/
16 area 0.0.0.016 network 192,168.1.0
15%
05.08.2024
://archive.ubuntu.com/ubuntu noble-backports/universe amd64 Packages [11.5 kB]
Fetched 24.2 MB in 2s (13.1 MB/s)
Reading package lists...
Reading package lists...
...
Processing triggers for libc-bin (2.39-0ubuntu8.2) ...
COMMIT ubuntu-dev
--> f12343192636
15%
17.02.2015
B+ has the following basic characteristics:
Broadcom BCM2835 system on a chip (SoC)
Single-core ARM1176JZF-S processor (32-bit processor) at 700MHz
Broadcom VideoCore IV GPU
512MB
15%
31.10.2025
, you can use the current package from Debian Sid [4], which is available there as version 0.19+20120328. After meeting these preconditions, you can start with a fresh Ubuntu 12.04 LTS server default
15%
07.06.2019
$ ethstats -c1
eth0: 0.03 Mb/s In 0.14 Mb/s Out - 51.4 p/s In 38.8 p/s Out
requests a single sample and shows a somewhat idle system.
Grand Finale
With a nearly inexhaustible supply
15%
30.11.2025
of read requests issued to the device per second.
w/s
: Number of write requests issued to the device per second.
rMB/s
: Number of megabytes read from the device per second.
wMB/s
: Number
15%
30.11.2025
is as follows:
tc filter add dev $DEV protocol ip parent 1:0 prio 100 u32 match ip $DIR 12.34.56.78 flowid 1:12
You'll be glad to know the filter's config is much simpler than the classes or the qdisc
14%
10.11.2021
package-list.txt
Output filename is: package-list.txt.lrz
package-list.txt - Compression Ratio: 2.604. Average Compression Speed: 0.000MB/s.
Total time: 00:00:00.04
By default, lrzip
does not overwrite the original file
14%
09.12.2021
-e package-list.txt
Enter passphrase:
Re-enter passphrase:
Output filename is: package-list.txt.lrz
package-list.txt - Compression Ratio: 2.537. Average Compression Speed: 0.000MB/s.
Total time: 00:00:05.11
Listing 11
14%
14.03.2013
/sbin/named ...
774 ?? SsJ 0:00,12 /usr/sbin/sshd ...
781 ?? IsJ 0:00,87 /usr/sbin/cron -s
...
The jls command lets you view all the currently active jails, as shown in Listing 6.
Listing 6
Active Jails
