17%
22.12.2017
by the fake record so that all traffic with destination address ABCD.EF00.0001 will go to the attacker's port.
The Ettercap [3] utility, also available on Kali Linux, is often used to launch a MAC
17%
29.09.2020
://en.wikipedia.org/wiki/ATX
ThinkPad T420: https://support.lenovo.com/us/en/solutions/pd015734/
16GB (2X8GB) RAM kit (204PIN SODIMM DDR3 SDRAM PC10600): https://www.amazon.com/gp/product/B00B2OT9HI/
250GB Samsung 850 EVO v
17%
11.06.2014
so many options and opinions is not a bad thing, but you need to sort through the ideas to find something that works for you and your situation.
In two further blog posts [3] [4], I wrote some simple
17%
27.08.2014
files in ext3/ext4 filesystems
Zipf theta - Estimate of Zipfian distribution theta
Ioprof is written in Perl and is fairly easy to run, but it has to be run as root (or with root privileges
17%
13.12.2018
disk reads: 1306 MB in 3.00 seconds = 434.77 MB/sec
federico@cybertron:~$ sudo hdparm -W /dev/sdb
/dev/sdb:
write-caching = 1 (on)
federico@cybertron:~$ sudo hdparm -W 0 /dev/sdb
/dev/sdb:
write
17%
28.11.2022
of alternative sources.
Listing 1
sensors Output
federico@ferenginar:~$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +42.5¡C (high = +70.0¡C)
(crit = +100.0¡C
17%
20.02.2023
=/etc/slurm/slurm.epilog.clean
NodeName=n0001 Sockets=1 CoresPerSocket=4 ThreadsPerCore=2 State=UNKNOWN
PartitionName=normal Nodes=ALL Default=YES MaxTime=24:00:00 State=UP Oversubscribe=EXCLUSIVE
Slurmctld
17%
03.12.2015
.0/24 !10.0.3.0/24
root@ubuntu:~# ps -eaf | grep dnsmas
lxc-dns+ 1047 1 0 18:24 ? 00:00:00 dnsmasq -u lxc-dnsmasq --strict-order --bind-interfaces --pid-file=/run/lxc/dnsmasq.pid --conf
17%
17.02.2015
.
Listing 1
auditd.conf
log_file = /var/log/audit/audit.log
log_format = RAW
log_group = root
priority_boost = 3
flush = INCREMENTAL
freq = 20
num_logs = 5
disp_qos = lossy
dispatcher = /sbin
17%
21.08.2012
-------------------- ----------- -------- ---------------- ------ ----- ------ ------ ----- - -----
10.test1 laytonjb batch mpi_pi_fortran90 -- 1 3 -- 00:10 Q --
The qstat
command gets the status of the queues in Torque, and the -a
option tells it to check all
