16%
04.12.2024
={"city": "New York"}), PointStruct(id=5, vector=[0.24, 0.18, 0.22, 0.44], payload={"city": "Beijing"}), PointStruct(id=6, vector=[0.35, 0.08, 0.11, 0.44], payload={"city": "Mumbai"}),],
)
The database
16%
05.08.2024
/average VFull-backup size is above acceptable limit of 25TB
(W102) last VFull runtime is longer then acceptable limit of 22h
(C301) average incremental-backup size is above acceptable limit of 200GB
(W302
16%
30.01.2024
the documentation [3] when you are setting up and managing the system.
In the following discussion, I concentrate on the free OSSEC version 3.7.0 install on Ubuntu 22.04. After the mandatory Linux update, install
16%
03.04.2024
the recommendations in the RustDesk documentation and enabling and configuring the firewall:
sudo ufw allow 22/tcp
sudo ufw allow 21115:21119/tcp
sudo ufw allow 21116/udp
sudo ufw allow 8000/tcp
sudo ufw enable
16%
03.04.2024
-ons, such as Kube-OVN (Open vSwitch), to do so.
The installation on an Ubuntu 22.04 LTS server is very simple. You can add the MicroK8s Snap during the operating system installation. The microk8s command-line tool
16%
25.09.2023
://localhost:22"
}
ingress_rule {
service = "http_status:404"
}
}
}
In this example, when Cloudflare receives a connection addressed to
${var
16%
28.11.2023
to little NVMe drives that are only a few millimeters thick and very short. The M.2 SSDs are approximately 22mm wide and 60-80mm long. It became obvious that putting a fair number of SSDs that are very fast
16%
27.09.2024
virtual instance for development and test purposes on which to carry out the work. Again, Ubuntu 22.04 is a good choice. The steps are quickly completed: Use curl to download the k0s binary, which you
16%
31.10.2025
, 50GB of memory, and a 1Gb NIC. However, the CPU must be a 64-bit system with a mandatory virtualization extension: either AMD-V or Intel VT.
In contrast to RHEV 2.2, RHEV 3 is no longer based on RHEL
16%
30.11.2025
for the KVM host:
Connectivity (LAN)
Unix load
RAM/Swap load
Storage utilization
SSH availability (typically on port 22)
Optional extensions: If you use libvirt, you can check
