Lead Image © bowie15, 123RF.com

Lead Image © bowie15, 123RF.com

Using a Bash script to mirror external monitors

Mirror, Mirror

Article from ADMIN 27/2015
If you use your Linux laptop for public presentations – or other tasks that require an external display – you are probably familiar with the problem of making your computer's display resolution fit the external device. This homegrown script offers an easy, automated solution.

Like many of my colleagues, I use my own laptop to play back presentations at conferences. My Dell Latitude E6430 works perfectly on Ubuntu. However, one critical problem remains: when I connect the device to a projector or a different display, I don't always get the aspect ratio I would prefer. Screen mirroring typically only gives a poor resolution of 1,024x768 pixels, with large black boxes left and right. Unfortunately, my laptop has a 16:9 display with a resolution of 1,600x900 pixels.

Common Denominator

Some research on the topic of screen resolution reveals the root cause: the maximum resolution that my laptop display and the external projector or monitor have in common is 1,024x768 pixels. All higher resolutions are only available on one of the two devices. When mirroring, my Ubuntu system thus automatically chooses the 1,024x768 resolution as the best common option between the two display devices [1].

Because the external monitor typically uses a 16:10 aspect ratio as a normal office display, it only offers 16:10 resolutions via the data display channel (DDC) interface [2]. In addition to its native 16:9 resolution, the laptop display also supports a number of lower resolutions, but many of these resolutions are rarely supported by external displays or projectors.

In many situations, as the speaker, I want the external display or projector to mirror my laptop's screen contents, so I can work on my laptop while letting others watch.

Enter xrandr

Working on my laptop with a resolution of 1,024x768 is not much fun, but luckily, I have another option. The X Server RandR extension (xrandr) "provides automatic discovery of modes (resolutions, refresh rates, …) [and] the ability to configure output dynamically (resize, rotate, move, …)" [3]. The xrandr configuration tool lets me configure settings for RandR [4] in Linux. The call to xrandr is pretty bulky:

xrandr --fb 1600x900 --output LVDS1 --mode 1600x900 \
  --scale 1x1 --output HDMI3 --same-as LVDS1 --mode 1920x1200 \
  --scale-from 1600x900

This command mirrors my laptop screen on the external display and scales the image from the native 1,600x900 resolution on my laptop to a native 1,900x1,200 resolution on the external display.

Although the external display extends the vertical dimension of the image, viewers are unlikely to notice the change. With today's crop of 16:9 projectors, this trick works even better, whether the projector works with 720, 768, or 1,080 lines, the results are usually successful thanks to xrandr scaling.

Automated Happiness

After a few months of experimenting, and an increasing number of xrandr command lines, I started investigating how to automate the whole process. Unfortunately, the display settings in Ubuntu do not currently support the new scaling options in xrandr 1.3. Although you could retroactively install several additional tools for screen settings, all they do – in the best case – is manage different profiles. At this writing, none of these tools automatically configures the best possible mirroring configuration.

Armed with some knowledge of Bash and sed, you can solve this problem, however. Listing 1 shows a complete script called automirror.sh [5]; The script is GPL'd and needs the xrandr tool and notify-send as dependencies on Ubuntu. (Both xrandr and notify-send are part of the default Ubuntu installation, but they are also available on other Linux distributions.) You can copy the script to ~/bin or /usr/bin.

Listing 1


01 #!/bin/bash
02 set -e -E -u
08 NOTIFY_SEND=( ${AUTOMIRROR_NOTIFY_COMMAND: -notify-send -a automirror \
                -i automirror "Automatic Mirror Configuration"} )
10 # force called programs to english output
13 function die {
14     echo 1>&2 "$*"
15     exit 10
16 }
18 function get_display_resolution {
19     local find_display="$1" ; shift
20     local display_list="$1"
21     while read display width_mm height_mm width height ; do
22         if [[ "$display" == "$find_display" ]] ; then
23             echo ${width}x${height}
24             return 0
25         fi
26     done <<<"$display_list"
27     die "Could not determine resolution for '$find_display'. Display Data:
28 $display_list"
29 }
31 function get_highest_display {
32     local display_list="$1" ; shift
33     local data=( $(sort -r -n -k 5 <<<"$display_list") )
34     echo $data
35 }
37 xrandr_current="$($XRANDR_STATUS_PROGRAM)"
39 # find connected displays by filtering those that are \
    connected and have a size set in millimeters (mm)
40 connected_displays=( $(sed -n -e 's/^\(.*\) connected.\
                          *mm$/\1/p' <<<"$xrandr_current") )
42 # See http://stackoverflow.com/a/1252191/2042547 \
    for how to use sed to replace newlines
43 # display_list is a list of displays with their \
    maximum/optimum pixel and physical dimensions
44 # thanks to the first sed I know that here is only a SINGLE space
45 display_list="$(sed ':a;N;$!ba;s/\n   / /g'<<<"$xrandr_current" | sed \
    -n -e 's/^\([a-zA-Z0-9_-]\+\) connected.* \([0-9]\+\)mm.* \([0-9]\+\)mm \
    \([0-9]\+\)x\([0-9]\+\).*$/\1 \2 \3 \4 \5/p' )"
46 : connected_displays: ${connected_displays[@]}
47 : display_list: "$display_list"
49 if [[ -z "$display_list" ]] ; then
50     die "Could not find any displays connected. XRANDR output:
51 $xrandr_current"
52 fi
54 # if the primary display is NOT connected then use the highest \
    display as primary
55 if [[ "${connected_displays[*]}" != *$PRIMARY_DISPLAY* ]] ; then
56     PRIMARY_DISPLAY=$(get_highest_display "$display_list")
57 fi
58 frame_buffer_resolution=$(get_display_resolution \
                             $PRIMARY_DISPLAY "$display_list")
60 : $frame_buffer_resolution
62 xrandr_set_args=( --fb $frame_buffer_resolution )
63 notify_string=""
64 if (( ${#connected_displays[@]} == 1 )) ; then
65     xrandr_set_args+=( --output $connected_displays --mode \
                         $frame_buffer_resolution --scale 1x1 )
66     notify_string="$connected_displays reset to $frame_buffer_resolution"
67 else
68     other_display_list="$(grep -v ^$PRIMARY_DISPLAY <<<"$display_list")"
69     $XRANDR_SET_PROGRAM $(while read display junk ; do echo " --output \
                             $display --scale 1x1 --off" ; done \
70     xrandr_set_args+=( --output $PRIMARY_DISPLAY --mode \
                         $frame_buffer_resolution --scale 1x1 )
71     notify_string="$PRIMARY_DISPLAY is primary at $frame_buffer_resolution"
72     while read display junk ; do
73         mode="$(get_display_resolution $display "$other_display_list")"
74         xrandr_set_args+=( --output $display --same-as \
                             $PRIMARY_DISPLAY --mode "$mode" --scale-from \
                             $frame_buffer_resolution  )
75         notify_string="$notify_string\n$display is scaled mirror at $mode"
76     done <<<"$other_display_list"
77 fi
79 #logger -s -t "$0" -- Running $XRANDR_SET_PROGRAM "${xrandr_set_args[@]}"
81 $XRANDR_SET_PROGRAM "${xrandr_set_args[@]}"
82 ret=$?
83 "${NOTIFY_SEND[@]}" "$notify_string"
84 exit $ret

Buy this article as PDF

Express-Checkout as PDF
Price $2.95
(incl. VAT)

Buy ADMIN Magazine

Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

  • Wireshark

    Troubleshoot network problems with this popular protocol analyzer.

  • Resolving problems with DNS, Active Directory, and Group Policy
    Upgrading domain controllers or installing new servers can cause problems with name resolution, Active Directory replication, and Group Policy. A coordinated approach can isolate these errors in Windows Server 2008 or newer.
  • Setting up and managing IPv6 on Windows Server 2016
    Windows Server 2016 automatically prefers IPv6 addresses, if available, but the manual configuration steps differ from IPv4 and necessitate new tools. Here's how to approach IPv6 in your daily admin work.
  • Visualize Your Network

    Sometimes data that’s five minutes old just isn’t good enough. An abundance of network monitoring tools for SNMP makes a sys admin’s job easier by collecting and displaying a superabundance of constantly changing data.

  • Develop your own scripts for Nmap
    Nmap does a great job with standard penetration testing tasks, but for specific security analyses, you will want to develop your own test scripts. The Nmap Scripting Engine makes this possible.
comments powered by Disqus