18%
20.11.2013
. In my case, I followed the installation instructions for CentOS on my CentOS 6.4 system. The instructions are very good and very accurate – be sure you read all of it before trying to install s3q
l
18%
09.06.2018
Ethernet has been scaling faster recently. Whereas each successive Ethernet speed bump used to take seven to 10 years, it now happens in two to three years. Furthermore, the migration to flash
18%
09.08.2015
write performance thus increases from a few hundred to several thousand IOPS. Additionally, latency is reduced noticeably – from 5 to 10ms to less than 1ms. In RAID 5 and 6 with HDDs, the write cache
18%
31.10.2025
cluster. Additionally, POD has redundant high-speed Internet with remote connectivity ranging from 50Mbps to 1Gbps.
Several storage options are also available, starting with high-speed NFS using 10Gig
18%
07.10.2025
are no longer looking at bandwidths in the 1Gbps range; instead, 25Gbps is the norm, and even 400Gbps is no longer uncommon. Other packet filters for Linux, most notably the now obsolete iptables, are simply too
18%
02.08.2021
.000137
3.817749
128
0.000313
13.408678
0.000572
7.330078
0.000381
10.995116
0.000656
6.392509
256
0.001808
18
18%
09.01.2013
with your S3 bucket, and you can use s3sync [6] to sync to S3 (somewhat like rsync). If you are running Windows, these Amazon S3 clients are available for backing up data to Amazon S3:
Amazon S3 Transfer
18%
22.05.2012
.20.51.0.2-5.28.el6.x86_64 already installed and latest version
Package byacc-1.9.20070509-6.1.el6.x86_64 already installed and latest version
Package indent-2.2.10-5.1.el6.x86_64 already installed and latest version
18%
19.10.2012
with remote connectivity ranging from 50Mbps to 1Gbps.
Several storage options are also available, starting with high-speed NFS using 10GigE attached storage. List pricing for storage on POD is US$ 0.10/GB
18%
25.03.2021
: array /dev/md0 started.
Listing 4
View RAID Status
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid1 sdd1
