Search

tottime percall cumtime percall filename:lineno(function) 148/1 0.001 0.000 156.745 156.745 {built-in method builtins.exec} 1 149.964 149.964 156.745 156.745 md_002.py:3

a maximum of 1,000 objects, remember the offset, and keep retrieving the data until the bucket is processed. Listing 3 fetches all the files in a bucket from the cloud. It interprets your keys as Unix paths ... Data on AWS S3 is not necessarily stuck there. If you want your data back, you can siphon it out all at once with a little Python pump. ... Data Exchange with AWS S3 ... Getting data from AWS S3 via Python scripts

       64 6836191232 sde    8       48 6836191232 sdd    8       80 6836191232 sdf Make sure to load the ZFS modules, $ sudo modprobe zfs and verify that they are loaded: $ lsmod|grep zfs zfs                  3039232  3

all 1.22 0.00 0.73 0.00 0.00 98.05 12:45:01 PM all 1.32 0.00 0.72 0.01 0.00 97.95 12:55:01 PM all 1.79 0.00 0.75 0

-generation SSD, being tested on a 3Gbps SATA 2 bus. I have an 80GB Intel 320 SSD, performing remarkably close to its specified sequential read rating of 270MBps [1], but it is the second-generation drive

-sent:           22,334 (total)              0/s  (Per-Sec)    pkts-recv:           68,018 (total)              2/s  (Per-Sec) lo    Bytes-sent:          2.55 K (total)         0.00 B/s  (Per-Sec)    Bytes

.40 <- < 71% idle > 0 1.00 0.00 0.37 0.00 0.00 0.06 0.00 0.00 0.00 98.57 1 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2 3.77 0.00

.                       The first thing that strikes me in this strace output is that I’ve graduated from one write() function to two. The first writes 4,096 bytes, and the second writes 3,904 bytes. When I divide the total of 8,000

=libaio, iodepth=32 fio-3.12 Starting 1 process Jobs: 1 (f=1): [w(1)][100.0%][w=1420KiB/s][w=355 IOPS][eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=3377: Sat Jan  9 15:31:04 2021   write: IOPS=352, BW=1410Ki

being used. It doesn’t matter what platform you use: If it’s pay as you go, you’ll want to monitor it to prevent your $1,000-a-month bill turning into $10,000 a month. In the tradition of programmers