21%
23.03.2016
_scrub_rate 0 ue_count
0 csrow0 0 csrow3 0 csrow6 0 mc_name 0 seconds_since_reset 0 ue_noinfo_count
In the /sys
filesystem, for each csrow, a number of entries contain a lot of information
21%
07.04.2022
:aws:iam::
:policy/IAM_Policy --policy-document file://privesc.json --set-as-default
{
"PolicyVersion": {
"VersionId": "v2",
"IsDefaultVersion": true,
"CreateDate": "2021-10-14T09:52:55+00:00"
}
}
By checking the policy
21%
17.02.2015
in the neighbor cache. Display the contents of this cache using the command:
netsh interface ipv6 show neighbor
If you are already in the right context, simply type show neighbor, or the short form sh n (Figure 3 ... Windows provides a simple dialog box for configuring IPv6, but the available settings only scratch the surface. IPv6 comes with many features that are primarily managed using the command-line tool ... Configuring IPv6 on Windows ... Configuring IPv6 in Windows with NetShell ... IPv6 on Board
21%
20.11.2013
advantages: S3QL.
... . In my case, I followed the installation instructions for CentOS on my CentOS 6.4 system. The instructions are very good and very accurate – be sure you read all of it before trying to install s3q
l ... advantages: S3QL.
... S3QL Filesystem for HPC Storage
21%
21.01.2020
RAID
$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sde1[4] sdd1[3] sdc1[2] sdb1[1] nvme0n1p1[0](J)
20508171264
21%
25.05.2012
. Something along the lines of:
TID PRIO USER DISK READ DISK WRITE IO> COMMAND
18981 be/4 www-data 0.00 B/s 3.92 K/s apache2 -k start
Or, if you were trying to see which system user
21%
11.04.2016
/etc/systemd/network
Listings 2 and 3 show the two configuration files for the normal Ethernet card (Listing 2) and the bridge device (Listing 3). You can decide which device is configured
21%
13.06.2016
/run/systemd/resolve/resolv.conf /etc/resolv.conf
mkdir /etc/systemd/network
Listings 2 and 3 show the two configuration files for the regular Ethernet card (Listing 2) and bridge device (Listing 3
21%
07.01.2014
a great deal of power in a few lines:
rm -rf backup.3
mv backup.2 backup.3
mv backup.1 backup.2
cp -al backup.0 backup.1
rsync -a --delete source_directory/ backup.0/
To better understand the script, I
21%
05.12.2019
will stop supporting version 2 and developers must begin the migration to Python 3 as soon as possible. However, there's a catch. If you get Python from the Ubuntu repositories (for either 16.04 or 18
