15%
05.10.2018
notes and the rvm
section, then just refer to the documentation. I’ve tested these commands on a cloud platform I’ve recently discovered called Vultr. They’re worth a look if you’re not aware
15%
29.09.2020
and the devices on the home network.
The logfile on the DNS server collects the domains called by network participants, as well as the IP addresses of the clients (i.e., personal data). This should set off privacy
15%
29.09.2020
. However, at the lowest level, SMART provides a simple binary bit of information – the drive is OK or the drive has failed. This bit of information is called the SMART status. Many times the output DISK
15%
30.11.2020
the content shown in Listing 3 in a file called debug.json, you can now run the command to create a sandbox Pod, so you can test from inside the cluster with that Pod:
$ crictl runp debug.json
4ecc5504f0453fa8
15%
20.06.2022
AWS services at the command line and automate them with scripts. To interact with AWS through the CLI outside of CloudShell (e.g., on your laptop), you need to configure the credentials for API calls. I
15%
22.05.2023
device on the secondary node, even when fully synchronized. If you do, you'll see the error:
$ sudo mount /dev/drbd0 /srv
mount: /srv: mount(2) system call failed: Wrong medium type.
Back on the primary
15%
22.05.2023
to them; it writes the initial module configuration to the /etc/sysconfig/lm_sensors file. A call to the sensors tool lists the sensors and their values. Depending on the system, some of them might
15%
05.12.2019
&& sudo make install
During the installation, the routine creates an entry in the Multimedia menu that lets you call MakeMKV with a single click. On first launch, you need to enter a registration key
15%
05.12.2019
, values such as temperatures, fan speeds, or UPS battery status can be called up with this SNMP setup – then the alert function makes sense. In addition to good old email, Grafana can control messengers
15%
30.01.2020
and create a writecache device mapper virtual node called wc with a 4K blocksize:
$ sudo dmsetup create wc --table "0 78151680 writecache s /dev/vg-cache/slow /dev/vg-cache/fast 4096 0"
Assuming
