28%
21.11.2017
Firmware versions 11.0/11.5/11.6/11.7/11.10/11.20, SPS Firmware version 4.0, and TXE version 3.0 are impacted.”
The affected products include sixth, seventh, and eighth generation Intel Core Processor
28%
13.06.2016
| openssl enc -base64
A sample HPKP header is shown in Listing 1.
Listing 1
Sample HPKP Header
Public-Key-Pins: pin-sha256=" F1lYgMAWJed1UM9BWAk3PKUxZhtSATn8LV17W9Uw6MKA="; pin-sha256=" UGNuJ8
28%
09.06.2018
directly [1] and from SerNet [2]. (At the time of print, versions 4.6 to 4.8 were available.) If you always want to use the latest version (e.g., the pre-release or release candidate), you can compile Samba
28%
04.12.2013
common in HPC to illustrate these differences: C, Fortran 90, and Python (2.x series). I run the examples on a single 64-bit system with CentOS 6.2 using the default GCC compilers, GCC and GFortran (4.4.6
28%
04.10.2018
Essentials Dashboard simplifies the procedure, these features are not available in larger organizations.
How ADManager Plus Works
ADManager Plus 6.6, from ManageEngine (Zoho Corporation's IT management
28%
10.06.2014
"ram": 2048,
07 "resolvers": ["192.168.111.254"],
08 "disks": [
09 {
10 "image_uuid": "1fc068b0-13b0-11e2-9f4e-2f3f6a96d9bc",
11 "boot": true,
12 "model": "virtio"
13 }
14
28%
12.05.2014
).
The requirements for EncFS are pretty simple:
FUSE version 2.6 or newer.
rlog – C++ logging library.
OpenSSL versions 0.9.6 through 0.9.8 (other version are untested).
boost – a C++ utility library
28%
16.08.2018
correctly. This simple test gets the kernel version of a different node using the IP address of the other node.
$ pdsh -w 192.168.1.250 uname -r
192.168.1.250: 2.6.32-431.11.2.el6.x86_64
The -w option means
28%
09.01.2013
difficulties because they require vendor-specific I/O control commands. Check the smartmontools page for more details on your specific card.
For this article, I used a freshly installed CentOS 6.4 [3
28%
01.08.2019
/log/iptables.log
Figure 4: The tail end of the iptables logfile.
For my environment, I wanted to disable IPv6 in /etc/sysctl.conf, because my ISP was IPv4 only:
##ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6
