23%
30.11.2025
the Downloads
page to a mirror, you might be overwhelmed by the list of innumerable files (Figure 1). Normally, however, all you need is the approximately 100MB ISO image, pfSense-2.0-RELEASE-i386.iso.gz, from
23%
30.11.2025
240
240
Still unknown
Operating voltage (V)
2.5
1.8
1.5 (DDR3L: 1.35; DDR3U: 1.25)
1.2
Chip (I/O clock frequency, MHz)
DDR-200 (100)DDR-266
23%
31.10.2025
to a 100Mb network, the path through the faster router wins. Where the paths are equivalent, the administrator can manually add a weighting value to the configuration, which is then reflected in the LSA
23%
30.11.2025
active_checks_enabled 1
22 passive_checks_enabled 0
23 check_command check_ssh
24 max_check_attempts 3
25
23%
30.11.2025
.gz
cd pen-0.18.0/
./configure
make
make install
Started with:
./pen -r -p pen.pid -C localhost:4444 -S 3 \
localhost:3306 192.168.56.101:3306:100 \
192.168.56.102:3306:100 192.168.56.103:3306:100
22%
30.11.2025
100
0.067
95
23
5
10
99
0.099
96
22
6
20
94
0.210
97
22
6
Unfortunately
22%
30.11.2025
presence provides the system with a last chance for a soft landing before more drastic action is taken. This month, I examine the darker side of the picture: Swap hits 100%, and hard out-of-memory errors
22%
25.05.2026
are a lot of fun and not very expensive. The Cluster HAT cluster was cool, but I felt limited by the amount of memory on the Pi Zeros at the time, which was only 512MB. The Raspberry Pi Foundation has
22%
30.11.2025
is as follows:
tc filter add dev $DEV protocol ip parent 1:0 prio 100 u32 match ip $DIR 12.34.56.78 flowid 1:12
You'll be glad to know the filter's config is much simpler than the classes or the qdisc
22%
30.11.2025
cgroup, which has no restrictions. You can test this by sending a SIGUSR1 to the process:
# kill -USR1 $pid
578804+0 records in
578804+0 records out
296347648 bytes (296 MB) copied, 7.00803 s, 42.3 MB
