31%
25.01.2018
to monitor:
Number of uncorrectable errors (ue_count
)
(ce_noinfo_count
)
(sdram_scrub_rate
)
(seconds_since_reset
)
Megabytes of memory (size_mb
)
Total correctable errors (ue
31%
12.05.2021
,80 0 2 2.005054640 0 C R [0]
8,80 0 3 2.005078936 4695 D R 144 [sg_inq]
What will this look like when you send more I/O? You can use the dd
utility to send 1MB of all-zero data to the drive:
$ sudo
31%
24.02.2022
MB
p
s
or Peak IOPS is
x
. However, what does “IOPS” really mean and how is it defined?
Typically, an IOP is an I/O operation, wherein data is either read or written to the filesystem
31%
13.06.2022
) for a class B problem size.
Therefore, I will run the EP, FT, and MG tests to check health performance. For class B, the EP test takes 5.46s, the FT test 17.26s, and the MB test 3.8s. If I stay with only
31%
13.07.2022
) [application/octet-stream]
Saving to: Rocky-8.6-x86_64-dvd1.iso
Rocky-8.6-x86_64-dvd1.iso 35%[===========> ] 3.74G 37.4MB/s eta 2m 45s
When you reconnected to the session, you didn’t specify
31%
10.04.2015
through Webmin.
The Linux distribution is also very lightweight. The basic system starts at about 150MB and only includes the most important components for operating the environment.
Starting Out
31%
29.09.2020
sitting at less than 50MB (and using less than half the RAM of a standard cluster) the binary that runs K3s is a sight to behold and well worth getting your hands on. Especially when it's deemed production
31%
30.11.2020
to the developers, 768MB of RAM and 4GB of free disk space are all it takes; moreover, UDP/53, TCP/80, and TCP/ 443 ports are required.
Starting NxFilter is unproblematic on popular operating system platforms
31%
02.08.2021
will this look like when you send more I/O? You can use the dd utility to send 1MB of all-zero data to the drive:
$ sudo dd if=/dev/zero of=/dev/sdf1 bs=1M
The blktrace utility will dump the captured output
31%
21.08.2014
MB of main memory.
Radio Transmitters
Serf not only determines whether nodes are down, it can also dispatch events predefined by the admin. These events then trigger certain actions on the node
