17%
30.11.2025
YZCD
03 # DaemonOpts: -f /var/log/collectl -r00:00,7 -m -F60 -s+YZCD --iosize
04 ################################################################################
05 # Collectl: V3.6.1-4 HiRes: 1 Options
17%
27.08.2014
was the sequential write test using 1MB record sizes:
./iozone -i 0 -c -e -w -r 1024k -s 32g -t 2 -+n > iozone_write_1.out
To gather the block statistics, I ran ioprof in a different terminal window before I ran
17%
29.09.2020
, "Kubernetes k3s Lightweight Distro" [6], which discusses using the magically tiny K3s within Internet of Things (IoT) applications.
The name of K3s came from Kubernetes' often abbreviated form K8s; according
17%
18.07.2013
: XXXXXXXXXXXXXXXXXX
6 Firmware Revision: 2CV102HD
7 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
8 Standards:
9 Used: ATA/ATAPI-7 T13 1532
17%
13.12.2018
disk reads: 1306 MB in 3.00 seconds = 434.77 MB/sec
federico@cybertron:~$ sudo hdparm -W /dev/sdb
/dev/sdb:
write-caching = 1 (on)
federico@cybertron:~$ sudo hdparm -W 0 /dev/sdb
/dev/sdb:
write
16%
25.03.2020
%; done
An updated list of drives will display the newly created partitions just below each disk drive (Listing 2). The newly created partitions now have 1s attached to the drive names (lines 13, 15, 18
16%
21.01.2020
will display the newly created partitions just below each disk drive (Listing 2). The newly created partitions now have 1s attached to the drive names (lines 13, 15, 18, 20). The drive size has not changed much
16%
30.11.2025
total = summary.values.inject(0) { |sum, i| sum += i }
12 puts "Found #{total} instances in the following states:"
13 summary.keys.sort.each do |s|
14 printf "%20s %d\n", s, summary[s]
15 end
16 puts ... addresses this issue by offering a standardized API for infrastructure as a service (IaaS) clouds. ... 6
16%
04.11.2011
on enterprise-grade rack hardware, there is no reason one cannot follow along at home with a few beige boxes and an 10Mb hub, as long as the servers are capable of booting from the network with PXE [6]. PXE
16%
25.11.2012
untouched or to delete certain entries.
This new kernel, known as the crash or dump kernel, starts a part of the remaining Linux system and saves the dump. For kexec to work, admins need three things: a 2.6.13
