40%
12.03.2013
depending on the options you chose, but it doesn’t have as many options as iostat. The command I typically use is:
[laytonj@home8 ~]$ nfsiostat -h -m -t 1 4 > gg1.out
The output (wrapped) from this command
40%
05.03.2014
98.05
12:45:01 PM all 1.32 0.00 0.72 0.01 0.00 97.95
12:55:01 PM all 1.79 0.00 0.75 0.05 0.00 97.41
Average: all 1.67 0.00 0.80 0.03 0.00
40%
20.03.2014
.05 0.00 97.41
Average: all 1.67 0.00 0.80 0.03 0.00 97.5
Some implementations (e.g., SunOS) support a timex command that collects sar statistics parallel
39%
30.11.2025
.168.209.200
07 192.168.209.200:3260,1 iqn.1986-03.com.sun:02:8f4cd1fa-b81d-c42b-c008-a70649501262
08 # iscsiadm -m node
09 # /etc/init.d/open-iscsi restart
10 # fdisk -l
11 Disk /dev/sdb: 2147 MB, 2147418112 bytes
39%
30.11.2025
Commands = -f /var/log/collectl -r00:00,7 -m -F60 -s+YZCD --iosize
These options allow me to monitor CPU, disk, and network in brief mode and slab, processes, and disk in detailed mode. I also added the ability
39%
16.01.2013
-------------------------------------------------------------------------------
global - - - - - - -
master linux-x64 1 0.20 590.8M 68.1M 243.2M 0.0
node001 linux-x64 1 0
39%
18.07.2013
device size with M = 1000*1000: 80026 MBytes (80 GB)
24 cache/buffer size = unknown
25 Nominal Media Rotation Rate: Solid State Device
26 Capabilities:
27 LBA, IORDY
39%
21.01.2020
7 1 56008 loop1
06 7 2 56184 loop2
07 7 3 91264 loop3
08 259 0 244198584 nvme0n1
09 8 0 488386584 sda
10 8 1 1024 sda1
11 8
39%
20.03.2023
.
My Warewulf 4 cluster currently runs Rocky 8.6 (soon to be 8.7). A container used for the stateless compute nodes is the same as the head node (Rocky 8.6). Both /home
and /opt
are NFS shared from
39%
25.05.2012
was utilizing all of your resources, and the CPU and RAM inspections showed nothing, then you might stumble across output like this:
8521 naughtyuser 17.21 K/s 8.31 M/s 0.00 % 0.00 % dd if=/dev/urandom of
