25%
05.02.2019
Version: "2.0.0"
02
03 globalEnvVars:
04 - key: "MYSQL_USER"
05 value: "dev"
06 - key: "MYSQL_PASSWORD"
07 value: "123456"
08
09 commandTests:
10
11 # Is the MySQL package installed?
12 - name: "MySQL package
25%
01.08.2019
.SEC_FLAG_MAXIMUM_ALLOWED)
Listing 3
ACL Error Message
root@addc-01:~# samba-tool gpo aclcheck -U administrator
Password for [EXAMPLE\administrator]:
ERROR: Invalid GPO ACL O:DAG:DAD:PAI(A;OICI;0x001f01ff;;;DA)(A;OICI;0x001
25%
02.10.2017
is just “echoing” a string. Note that I'm intentionally using the relative path and not the usual absolute path, /usr/bin/host
.
Listing 1: A Sample snapcraft.yaml
File
---
name: Echo a name
version: "1.0
25%
10.09.2012
tell logger which log to use:
[laytonjb@test1 ~]$ logger -p cron.notice "This is a cron test"
...
[root@test1 ~]# tail -n 2 /var/log/cron
Aug 22 17:10:01 test1 CROND[7438]: (root) CMD (LANG=C LC
25%
10.04.2015
01 auto br0
02 iface br0
03 bridge-ports swp1 swp2 swp3 swp4 swp5
04 bridge-stp on
Because the list would be pretty long for 52 ports, you can also do the following specify
25%
12.09.2013
be authenticated!
07 tkmon
08 Install these packages without verification [y/N]? n
09 E: Some packages could not be authenticated
10 $ wget -O - https://192.168.56.102/tk-archive.gpg.pub | sudo apt-key add -
11
25%
10.04.2015
-WMIObject Win32_OperatingSystem | fl Name, BuildNumber, Version
Name: Microsoft Windows 8.1 Enterprise|C:\Windows|\Device\Harddisk0\Partition4
BuildNumber: 9600
Version: 6.3.9600
The command
25%
09.01.2013
://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 840 Series
Serial Number: S19HNSAD620517N
LU WWN Device Id: 5 002538 5a005092e
Firmware Version: DXT08B0Q
User Capacity: 120,034,123,776 bytes
25%
11.10.2016
network operating system in cooperation with Accton Technology Corporation, Arista, Broadcom, Intel, and VMware. The series of Altoline switches [3] by HP Enterprise (HPE), as the group is now called, were
25%
31.10.2025
Ethernet (PoE), you can verify this function. The tester can ping a remote node (10 targets can be preset) to log the packet loss and delay and perform a traceroute, reporting run times to each hop
