22%
18.07.2013
buffered disk reads: 616 MB in
3.00 seconds = 205.03 MB/sec
$ hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 6292 MB in
2.00 seconds = 3153.09 MB/sec
If this were a spinning disk, you would also
22%
30.11.2025
InfiniBand for the compute node storage traffic or will GigE or 10GigE be sufficient? Should I use 15,000rpm drives or 7,200rpm drives? Do I need SSDs (solid state drives)? Which filesystem should I use
21%
19.11.2019
Jobs: 1 (f=1): [w(1)][100.0%][w=654MiB/s][w=167k IOPS][eta 00m:00s]
test: (groupid=0, jobs=1): err= 0: pid=1225: Sat Oct 12 19:20:18 2019
write: IOPS=168k, BW=655MiB/s (687MB/s)(10.0GiB/15634msec); 0
21%
01.08.2012
| 4.3 MB 00:02
(2/2): nss-softokn-freebl-3.12.9-11.el6.i686.rpm | 115 kB 00
21%
20.02.2012
time: 11.79 secs
Data transferred: 2.47 MB
Response time: 0.22 secs
Transaction rate: 35.79 trans/sec
Throughput: 0
21%
30.11.2025
240
240
Still unknown
Operating voltage (V)
2.5
1.8
1.5 (DDR3L: 1.35; DDR3U: 1.25)
1.2
Chip (I/O clock frequency, MHz)
DDR-200 (100)DDR-266
20%
11.02.2016
amount of available RAM: 117,080MB in this case.
Mem used
: Amount of RAM used by the applications: 48,810MB in this case.
Mem free
: Potentially free RAM: 68,270MB in this case.
Mem cached
: RAM
20%
30.11.2025
/nsswitch.conf (Konfigurieren der Namensauflösung)
08 ...
09 hosts files dns
10 ipnodes files dns
11 ...
12 # vi /etc/hosts
13 ::1 localhost
14 127.0.0.1 localhost
15 192.168.1.200 myiscsiserver myiscsiserver.local loghost
16
20%
07.01.2013
selected. In Fedora and RHEL, this setup gives you a minimal, text-based installation (about 200 packages occupying 600MB). The names and scopes of the packages for Red Hat-based distributions are listed
20%
14.08.2017
storage is handled by the almost venerable ext3. The use of BusyBox [11] for most executable programs and of Dropbear [12] as the SSH daemon is the logical consequence of the Buildroot underpinnings
