71%
28.11.2022
of alternative sources.
Listing 1
sensors Output
federico@ferenginar:~$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +42.5¡C (high = +70.0¡C)
(crit = +100.0¡C
71%
27.08.2014
Zipfian Theta Range: 0.0348-1.4015 (est. 0.5043).
Trace_files: 0
Stats IOPS:
"4K WRITE" 100.00% (223855533 IO's)
Stats BW:
"4K WRITE" 100.00% (853.94 GiB)
This heatmap can help you 'see' hot spots
71%
04.10.2018
-if)#switchport access vlan 10
SW1(config)#int fastEthernet 0/2
SW1(config-if)#switchport access vlan 20
Imagine you have more than 100 switches in your network. Every time a new VLAN is created, you will need to find
70%
07.10.2014
. The second number is percent CPU load from the system (0.3%sy), and the next is percentage of jobs that are "nice" [2] (0.0%ni). After that, Top lists percent overall CPU time idle (86.3%id; four real cores
70%
28.11.2011
, it will only capture the first 68 bytes of each packet. Except in older versions of tcpdump, a snaplen
value of 0
uses a length necessary to capture whole packets. Figure 1 dissects the output of a sample dump
70%
01.02.2013
for it at /proc/loadavg/
[3]:
1.00 0.97 0.94 1/1279 7743
The three additional numbers provided by Linux are the number of running processes (one in this case), the total number of processes, and the last
70%
11.06.2014
at the bottom of the window, ranges from 0 (less risky) to 100 (more risky). Because these two processes started after the malware installed, they are likely bad. When I compared the Start Time of svchost
70%
18.08.2021
_record%y = counter + 1
my_record%z = counter + 2
my_record%value = counter * 10.0
write(8,*) my_record
end do
end if
close(8)
end program ex1
For this example
70%
27.09.2021
counter = 1,counter_limit
25 my_record%x = counter
26 my_record%y = counter + 1
27 my_record%z = counter + 2
28 my_record%value = counter * 10.0
29
70%
20.11.2013
_blocks..
..symlink_targets..
..names..
..contents..
..ext_attributes..
Compressing and uploading metadata...
Wrote 0.00 MiB of compressed metadata.
First, notice that I created the file as root. Second, the prefix
