28%
18.07.2013
: XXXXXXXXXXXXXXXXXX
6 Firmware Revision: 2CV102HD
7 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
8 Standards:
9 Used: ATA/ATAPI-7 T13 1532
28%
30.01.2020
=1): err= 0: pid=1634: Mon Oct 14 22:18:59 2019
write: IOPS=118k, BW=463MiB/s (485MB/s)(10.0GiB/22123msec); 0 zone resets
[ ... ]
Run status group 0 (all jobs):
WRITE: bw=463MiB/s (485MB/s), 463Mi
28%
30.01.2020
# Compute the potential energy and forces
174 12525000 7036459.0 0.6 2.0 for j in range(0, p_num):
175 12500000 7730669.0 0.6 2.2 if (i != j):
176
28%
19.11.2019
volume "/dev/sdb" successfully created.
Then, I verify that the volumes have been appropriately labeled:
$ sudo pvs
PV VG Fmt Attr PSize PFree
/dev/nvme0n1 lvm2 --- <232.89g <232.89g
/dev/sdb lvm2 --- <6
28%
12.05.2020
68e152db7e5bb36b1cca638",
"sha256:37b9a4b2218692d028f9f26aa9cb85bf1f56d9abe612ba31304643bdb448484f",
"sha256:b16af11cbf2977eb52ba4d6cee5b713721cc19812b8c90ea1f22e7e
28%
17.02.2015
5420 Octa
Quad ARM Cortex-A15 (32KB instruction/32KB data/2MB L2) @1.8GHz, Quad-core ARM Cortex-A7 (32KB/32KB/512KB) @1.3GHz
Mali T-628 MP6
3GB LPDDR3e RAM (14.9GBps memory
28%
14.11.2013
/devices/system/edac/mc/mc0/csrow0/size_mb
8192
login2$ more /sys/devices/system/edac/mc/mc0/csrow0/ue_count
0
Some attribute files in /sys/devices/system/edac/mc/mc0/ can be very useful (Listing 6). As with the csrow
27%
02.02.2021
those exact packages to keep your system trim. The commands in Listing 7 start up the SSH daemon (sshd) and tell you that it is listening on port 22. IPv6 and IPv4 connections are open on the default port
27%
21.08.2012
: 18:59:43 up 2:42, 5 users, load average: 0.05, 0.02, 0.01
n0001: ssh: connect to host n0001 port 22: Connection timed out
pdsh@test1: n0001: ssh exited with exit code 255
You can do many other
27%
11.02.2016
there are normally two. The size of these two files influences the speed of write access to InnoDB. This value was far too small for many years (5MB). The new default values in MySQL 5.6 take this into account
