21%
30.11.2025
for this article, my required space was approximately 300MB and just under 100MB for the temporary staging space.
Keep the temporary staging directory intact for future installations and customizations. The disk
21%
30.11.2025
) with 12 Serial ATA disks, a 320 UW SCSI controller for the host connection, and 512MB cache.
I configured various disk groups and logical volumes on this powerful hardware and exported them to the backup
21%
31.10.2025
built-in command provides a breakdown of where a program's share of CPU was spent and how much time elapsed during a given task:
$ time ps -axjf > /dev/null
real 0m0.029s
user 0m0.005s
sys 0m0
20%
30.11.2025
into the kernel, you only need the userspace tools from the lxc package to take the software for a trial run. The following line in /etc/fstab
none /cgroup cgroup defaults 0 0
mounts the cgroup filesystem, which
20%
30.11.2025
queries. This is one reason why a Galera setup with only two nodes is not recommended.
An SST can be accomplished with mysqldump, rsync, or XtraBackup (2.0 and up). With a very large data volume (as
20%
30.11.2025
another could allow the user to set up memory of between 1 and 8GB in increments of 512MB.
The Deltacloud API bundles all these possibilities into hardware profiles, which means the clients are provided
20%
31.10.2025
(real8), DIMENSION(:,:), ALLOCATABLE :: u ! solution array
011 REAL(real8) :: tol=1.d-4, diff=1.0d0
012 REAL(real8) :: delta
013 REAL(real8) :: x
014 REAL(real8) :: pi
015 REAL(real8) :: exact
20%
31.10.2025
visit: http://www.skysql.com.
JetBrains Releases PhpStorm and WebStorm
JetBrains has released PhpStorm 5.0, its PHP IDE, as well as WebStorm 5.0, the major new version of its JavaScript IDE. PhpStorm 5.0
20%
30.11.2025
utilities to manage your Open vSwitch:
brctl addbr extern0
brctl addif extern0 eth0
Distribution scripts for creating bridges will work in the normal way. You can also use ovs-vsctl to manage the bridge
20%
28.07.2025
be used to fix any vulnerabilities found.
Mapping the Network
In this example, I use 10.0.0.0/16 as the internal network. If you do not know the exact IP addresses of your DCs, you can easily find them
