41%
17.01.2023
to NTP server (162.159.200.123) at stratum 4
time correct to within 21 ms
polling server every 64 s
Your output will not match this exactly, but you can see that it’s using an outside source to synchronize
41%
20.06.2012
| 3.5 kB 00:00
elrepo | 1.9 kB 00:00
rpmforge
41%
04.12.2024
Shift or – as shown here – an Ingress route for accessing the AWX service.
This strategy also works with MicroK8s or K3s. You might have to adjust the Ingress definition if routers such as Traefik cannot cope
41%
07.04.2022
,BROADCAST,RUNNING,MULTICAST> mtu 1460
inet 10.0.0.2 netmask 255.255.255.255 broadcast 0.0.0.0
inet6 fe80::bfd3:1a4b:f76b:872a prefixlen 64 scopeid 0x20
ether 42:01:0a:80:00:02 txqueuelen 1000
41%
25.03.2020
7 1 56008 loop1
06 7 2 56184 loop2
07 7 3 91264 loop3
08 259 0 244198584 nvme0n1
09 8 0 488386584 sda
10 8 1 1024 sda1
11
41%
14.08.2017
:31 FS_scan.csv
$ gzip -9 FS_scan.csv
$ ls -lsah FS_scan.csv.gz
268K -rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip with the -9
41%
05.11.2018
it at Linux Networx in the early 2000s. Over the years, it has been developed by Lawrence Livermore National Laboratory, SchedMD, Linux Networx, Hewlett-Packard, and Groupe Bull. According to the website, Slurm
41%
13.12.2018
.
Listing 2
sinfo
$ sinfo -s
PARTITION AVAIL TIMELIMIT NODES(A/I/O/T) NODELIST
p100 up infinite 4/9/3/16 node[212-213,215-218,220-229]
sbatch
To submit a batch serial
41%
21.01.2020
7 1 56008 loop1
06 7 2 56184 loop2
07 7 3 91264 loop3
08 259 0 244198584 nvme0n1
09 8 0 488386584 sda
10 8 1 1024 sda1
11
41%
10.07.2017
with the original Raspberry Pi Model A, ranging from two to more than 250 nodes. That early 32-bit system had a single core running at 700MHz with 256MB of memory. You can build a cluster of five RPi3 nodes with 20
