24%
07.10.2014
/lib/sheepdog
root 582 581 0 13:13 ? 12:00:00 AM sheep -p 7000 /var/lib/sheepdog
# grep sheep /proc/mounts
/dev/sdb1 /var/lib/sheepdog ext4 rw,relatime,data=ordered 0 0
# grep sheep /etc/fstab
/dev
24%
02.08.2021
rapiddisk 7.2.0
Copyright 2011 - 2021 Petros Koutoupis
Detached device rd1
To compare the RAM drive with a local 12Gb Serial Attached SCSI (SAS) spinning hard disk drive (HDD) connected to a 6Gb Host Bus
24%
11.02.2016
there are normally two. The size of these two files influences the speed of write access to InnoDB. This value was far too small for many years (5MB). The new default values in MySQL 5.6 take this into account
24%
26.02.2014
of time writing: 0 ms
sdd1 :
Number of reads: 1,544 Number of bytes: 77.75 M Read Rate: 0.00 B/s
Amount of time reading: 12,477 ms
Number of writes: 18,263 Number of bytes: 148.16 M
24%
13.12.2018
disk reads: 1306 MB in 3.00 seconds = 434.77 MB/sec
federico@cybertron:~$ sudo hdparm -W /dev/sdb
/dev/sdb:
write-caching = 1 (on)
federico@cybertron:~$ sudo hdparm -W 0 /dev/sdb
/dev/sdb:
write
23%
13.12.2022
Packages:
(1/6): dhcp-common-4.3.6-47.el8.noarch.rpm 902 kB/s | 206 kB 00:00
(2/6): dhcp-libs-4.3.6-47.el8.x86_64.rpm 3.1 MB/s | 147 kB 00:00
(3/6
23%
30.01.2020
: 1 (f=1): [w(1)][100.0%][r=0KiB/s,w=1401KiB/s][r=0,w=350 IOPS][eta 00m:00s]
test: (groupid=0, jobs=1): err= 0: pid=3104: Sat Oct 12 14:39:08 2019
write: IOPS=352, BW=1410KiB/s (1444kB/s)(82.8Mi
23%
05.08.2024
= [size][size]int {{0},{0},}
08
09 for i := 0; i < size; i++ {
10 for j := 0; j < size; j++ {
11 array[i][j]++
12 }
13 }
14
15
22%
19.11.2019
Jobs: 1 (f=1): [w(1)][100.0%][w=654MiB/s][w=167k IOPS][eta 00m:00s]
test: (groupid=0, jobs=1): err= 0: pid=1225: Sat Oct 12 19:20:18 2019
write: IOPS=168k, BW=655MiB/s (687MB/s)(10.0GiB/15634msec); 0
22%
20.02.2012
.51, 0, 0.36, 17.74, 0.00, 6.38, 90, 0
2012-01-09 21:10:00, 92, 4.42, 0, 0.35, 20.81, 0.00, 7.22, 100, 0
2012-01-09 21:12
