17%
02.08.2021
_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 077 063 --- Pre-fail Always - 56770409
3 Spin_Up_Time 0x0003
16%
18.07.2013
-generation SSD, being tested on a 3Gbps SATA 2 bus.
I have an 80GB Intel 320 SSD, performing remarkably close to its specified sequential read rating of 270MBps [1], but it is the second-generation drive
16%
17.03.2020
64 6836191232 sde
8 48 6836191232 sdd
8 80 6836191232 sdf
Make sure to load the ZFS modules,
$ sudo modprobe zfs
and verify that they are loaded:
$ lsmod|grep zfs
zfs 3039232 3
16%
30.01.2020
tottime percall cumtime percall filename:lineno(function)
148/1 0.001 0.000 156.745 156.745 {built-in method builtins.exec}
1 149.964 149.964 156.745 156.745 md_002.py:3
15%
31.10.2025
# weight 1.000
028 alg straw
029 hash 0 # rjenkins1
030 item device1 weight 1.000
031 }
032 host host2 {
033 id -3 # do not change unnecessarily
034
15%
22.10.2012
not change unnecessarily
027 # weight 1.000
028 alg straw
029 hash 0 # rjenkins1
030 item device1 weight 1.000
031 }
032 host host2 {
033 id -3 # do
15%
04.11.2011
command [3], you can use GNU parallel as a drop-in replacement and start executing many things at once right away.
Surprisingly, the parallel
command was not packaged for Fedora 13 or the Fedora Rawhide
15%
17.08.2011
being used.
It doesn’t matter what platform you use: If it’s pay as you go, you’ll want to monitor it to prevent your $1,000-a-month bill turning into $10,000 a month.
In the tradition of programmers
15%
11.02.2016
.40 <- < 71% idle >
0 1.00 0.00 0.37 0.00 0.00 0.06 0.00 0.00 0.00 98.57
1 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
2 3.77 0.00
15%
18.06.2014
]: 13502 ( 3.48%) ( 87.59% cumulative)
[ 64- 128 KB]: 12083 ( 3.11%) ( 90.70% cumulative)
[ 128- 256 KB]: 8623 ( 2.22%) ( 92.93% cumulative)
[ 256- 512 KB]: 13437 ( 3
