16%
05.08.2024
catatonit conmon containernetworking-plugins crun golang-github-containers-common
golang-github-containers-image netavark passt podman
0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 131 MB
16%
29.09.2020
between failure and SMART values. The disks were a combination of consumer-grade drives (SATA and PATA) with speeds from 5,400 to 7,200rpm and capacities ranging from 80 to 400GB. Several drive
16%
24.09.2015
. The speed-up increases from 1.00 with one process to 4.71 using 64 processes. Of course, the wall clock time for the serial portion of the application does not change; it stays at 200 seconds regardless
16%
08.10.2015
. The speed-up increases from 1.00 with one process to 4.71 using 64 processes. Of course, the wall clock time for the serial portion of the application does not change; it stays at 200 seconds regardless
16%
30.11.2025
(6192 bits), 774 bytes captured (6192 bits)
Ethernet II, Src: 00:1a:2b:3c:4d:5e, Dst: 00:6f:7g:8h:9i:0j
Internet Protocol Version 4, Src: 192.168.1.101, Dst: 192.168.1.104
User Datagram Protocol, Src Port
16%
02.02.2021
.
As surely as night follows day, automated attacks will target the default Secure Shell port (TCP port 22), so I will use SSH as the guinea pig test case with the knowledge that I can move the real SSH service
16%
02.06.2026
backup was created at 2:00am March 5. Thanks to PITR, you can first restore the 2:00am backup and then reapply all transactions up to exactly 10:14am from the binary logs. This method restores the database
16%
06.08.2013
-layer address means a host cannot be addressed. If you want to assign the IP address 10.1.1.1
to a fixed MAC address of 00:d0:a7:b1:c7:de
on eth1, the following command will do the trick:
ip neigh add 10
16%
12.09.2013
of 00:d0:a7:b1:c7:de
on eth1, the following command will do the trick:
ip neigh add 10.1.1.1 lladdr 00:d0:a7:b1:c7:de dev eth1 nud perm
Here, nud stands for Neighbor Unreachability Detection
16%
12.09.2013
see that the base module is by far the largest, weighing in at more than 200KB.
When a module is loaded, it is copied to /etc/selinux/targeted/modules/active/modules/. When the system is rebooted
