19%
27.09.2021
[2] (section 3.2). Next, I built the Darshan utilities (darshan-util) with the command:
./configure CC=gcc --prefix=[binary location]
Because I'm running these tests on an Ubuntu 20.04 system, I had
19%
03.08.2023
: "routers",
"value": "192.168.2.254"
}],
"reservations": [{
"hw-address": "00:11:22:33:44:55",
"ip-address": "192.168.2.60",
hostname: "host-2-60"
}, {
"hw-address": "00:00:00:00:00
19%
25.03.2021
(Listing 1), which indicates a push.
Listing 1
Server Push in Log
2020-11-22T12:01:10+01:00 1606042870.567 200 605 h2 "GET /index.html HTTP/2.0"
2020-11-22T12:01:10+01:00 1606042870.567 200
19%
25.10.2011
-interface st0.0;
16 ike {
17 gateway racoon;
18 proxy-identity {
19 local 192.168.1.0/24;
20 remote 192.168.2.0/24;
21 service any;
22 }
23
19%
18.07.2013
rq2 ra92
08 set rq3 cdrom
09
10 attach rq0 d0.dsk
11 attach rq1 d1.dsk
12 attach rq2 d2.dsk
13
14 attach -r rq3 cdrom.iso
15
16 set rl disable
17 set ts disable
18
19 set xq mac=08-00-2B-AA-BB-CC
20
19%
17.02.2015
of memory
Fast Ethernet (100Mbps)
MicroSD slot for local storage
Two USB ports
HDMI port
General-purpose I/O pins (GPIO)
This little SBC only consumes about 3W under load
19%
03.12.2015
the output. For example:
nmap -sV --script exploit -d3 targethost
NSE scripts have a clear-cut structure. This becomes most clear when you take a look at an existing script. The scripts not only define
19%
17.06.2017
-1) = 0.25 * (a(1:n-2,2:n) + a(3:n,2:n) + a(2:n,1:n-2) + a(2:n,3:n))
Using forall, the same can be written as:
forall (i=2:n-1, j=2:n-1) a(i,j) = 0.25*(a(i-1,j) + a(i+1,j) + a(i,j-1) + a(i,j+1
19%
20.10.2013
: Z1F35P0G
LU WWN Device Id: 5 000c50 050b954c3
Firmware Version: CC27
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl
19%
25.02.2013
)
01/31/2013 _i686_ (1 CPU)01/31/2013 09:56:01 AM
avg-cpu: %user %nice %system %iowait %steal %idle
14.78 0.38 3.47 2.16 0.00 79.21
Device: rrqm/s wrqm
