30%
30.05.2021
, 10 Jul 2020 10:55:30 GMT
Etag: "547fa7e369ef56031dd3bff2ace9fc0832eb251a"
Keep-Alive: timeout=5, max=1000
Last-Modified: Tue, 19 Jul 2020 11:59:33 GMT
Server: Apache
Transfer-Encoding: chunked
Vary ... HTTP/2 introduced multiplexing, resulting in superior bandwidth utilization over HTTP/1.1, and HTTP/3 solves the problem of transmission delays from packet loss by replacing TCP with QUIC. ... HTTP/1.1 versus HTTP/2 and HTTP/3
30%
23.03.2016
7
):
$ ls -s /sys/devices/system/edac/mc/mc0
total 0
0 ce_count 0 csrow1 0 csrow4 0 csrow7 0 reset_counters 0 size_mb
0 ce_noinfo_count 0 csrow2 0 csrow5 0 device 0 sdram
30%
23.07.2012
.13.134.52):
Not shown: 994 filtered ports
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 4.3 (protocol 2.0)
25/tcp closed smtp
53/tcp open domain ISC BIND 9.3
30%
05.12.2014
Model
TS-251
DS-214
N5550
ReadyNAS RN31400
Manufacturer
QNAP Inc.
Synology
Thecus
Netgear
Operating System
QTS 4.1.1 (Linux 3
30%
04.08.2020
LINSTOR open source software manages block storage in large Linux clusters and simplifies the deployment of high availability with distributed replicated block device version 9 (DRBD 9), dynamically
30%
02.06.2020
this problem, so I decided to take that route instead of installing Cargo.
From the Releases page [3] on the GitHub, repository you can see the latest build. In my case, that was version 0.9.0 at the time
30%
25.03.2021
.io/hostname: "node2"
dataRaidGroups:
- blockDevices:
- blockDeviceName: "blockdevice-3f4e3fea1ee6b86ca85d2cde0f132007"
- blockDeviceName: "blockdevice-db84a74a39c0a1902fced6663652118e
30%
28.11.2023
):
ssh-keygen -t ed25519 -a 100 -f
ubuntu-sre-id_ed25519 -q -N
2. Copy the SSH public key data on the target server to the authorized_keys file in the $HOME/.ssh directory. You can use the secure copy
30%
01.06.2024
is considered "embarrassingly parallel" [3] where no design effort is required to partition the problem into completely separate parts. If no data dependency exists between the problem sub-parts, no communication
30%
20.08.2012
the port after the file transfer has completed (but not without moving to the netcat-traditional
package, as mentioned before):
{ echo -ne "HTTP/1.0 200 OK\r\n\r\n"; cat filename.tar.gz; } | nc -l -p 15000
