18%
19.11.2019
VG Fmt Attr PSize PFree
/dev/nvme0n1 vg-cache lvm2 a-- 232.88g 232.88g
/dev/sdb vg-cache lvm2 a-- <6.37t <6.37t
Say I want to use 90% of the slow disk: I will carve a logical volume labeled slow
from the volume
18%
30.01.2020
=1): err= 0: pid=1634: Mon Oct 14 22:18:59 2019
write: IOPS=118k, BW=463MiB/s (485MB/s)(10.0GiB/22123msec); 0 zone resets
[ ... ]
Run status group 0 (all jobs):
WRITE: bw=463MiB/s (485MB/s), 463Mi
18%
18.07.2013
: XXXXXXXXXXXXXXXXXX
6 Firmware Revision: 2CV102HD
7 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
8 Standards:
9 Used: ATA/ATAPI-7 T13 1532
18%
21.08.2012
needed modules here
22 . /etc/profile.d/modules.sh
23 module load compilers/open64/5.0
24 module load mpi/mpich2/1.5b1-open64-5.0
25
26 ### Switch to the working directory; by default TORQUE launches
17%
21.08.2012
Dependency: libfreetype.so.6 for package: cairo-1.8.8-3.1.el6.i686
---> Package dejavu-lgc-sans-mono-fonts.noarch 0:2.30-2.el6 will be installed
---> Package glib2.i686 0:2.22.5-6.el6 will be installed
17%
11.05.2021
,024
0.100395
21.390301
0.215065
9.985277
0.02961
72.526405
0.055252
38.867022
2,048
0.776039
22.137891
1.612694
10
17%
21.08.2012
: 18:59:43 up 2:42, 5 users, load average: 0.05, 0.02, 0.01
n0001: ssh: connect to host n0001 port 22: Connection timed out
pdsh@test1: n0001: ssh exited with exit code 255
You can do many other
17%
21.08.2012
/primary_db | 419 kB 00:00
epel | 4.0 kB 00:00
epel
17%
13.12.2022
MB/s | 11 MB 00:05
Rocky Linux 8 - BaseOS 1.4 MB/s | 9.0 MB 00:06
Rocky Linux 8 - Extras
17%
18.07.2012
that come with the package. In this case, hwloc
itself is 1.0MB, but the sum of it and all of the dependencies is 11MB. Again, this might or might not seem like a large amount to you. It’s your decision
