27%
05.08.2024
= [size][size]int {{0},{0},}
08
09 for i := 0; i < size; i++ {
10 for j := 0; j < size; j++ {
11 array[i][j]++
12 }
13 }
14
15
27%
20.02.2012
.51, 0, 0.36, 17.74, 0.00, 6.38, 90, 0
2012-01-09 21:10:00, 92, 4.42, 0, 0.35, 20.81, 0.00, 7.22, 100, 0
2012-01-09 21:12
27%
30.01.2020
: 1 (f=1): [w(1)][100.0%][r=0KiB/s,w=1401KiB/s][r=0,w=350 IOPS][eta 00m:00s]
test: (groupid=0, jobs=1): err= 0: pid=3104: Sat Oct 12 14:39:08 2019
write: IOPS=352, BW=1410KiB/s (1444kB/s)(82.8Mi
27%
15.02.2012
of Figure 10. Figure 11 plots the Write IO function count for the KB range intervals. Figure 12 plots the Write IO function count for the MB range intervals. Figure 13 plots the Write IO function count
27%
26.01.2012
of Figure 10. Figure 11 plots the Write IO function count for the KB range intervals. Figure 12 plots the Write IO function count for the MB range intervals. Figure 13 plots the Write IO function count
27%
19.11.2019
Jobs: 1 (f=1): [w(1)][100.0%][w=654MiB/s][w=167k IOPS][eta 00m:00s]
test: (groupid=0, jobs=1): err= 0: pid=1225: Sat Oct 12 19:20:18 2019
write: IOPS=168k, BW=655MiB/s (687MB/s)(10.0GiB/15634msec); 0
27%
22.05.2012
.x86_64 0:1.9-22.el6_2.1
libacl.x86_64 0:2.2.49-6.el6 libattr.x86_64 0:2.4.44-7.el6 libblkid.x86_64 0:2.17.2-12.4.el6
libcap.x86_64 0
27%
21.08.2012
.
The script has line numbers to make a discussion much easier. Any directive to Torque starts with #PBS
, such as line 12. Therefore, comments begin with ###
, such as line 2. Lines 22-24 load the Environment
27%
28.03.2012
# Kernel: 2.6.32-220.4.1.el6.x86_64 Memory: 7540044 Swap:
# NumDisks: 2 DiskNames: sdb sda
# NumNets: 2 NetNames: lo: eth0:100
# NumSlabs: 201 Version: 2.1
# SCSI: DA:1:00:00:00 DA:2:00:00:00 CD:4:00:00:00
26%
18.07.2013
buffered disk reads: 616 MB in
3.00 seconds = 205.03 MB/sec
$ hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 6292 MB in
2.00 seconds = 3153.09 MB/sec
If this were a spinning disk, you would also
