25%
28.03.2012
# Kernel: 2.6.32-220.4.1.el6.x86_64 Memory: 7540044 Swap:
# NumDisks: 2 DiskNames: sdb sda
# NumNets: 2 NetNames: lo: eth0:100
# NumSlabs: 201 Version: 2.1
# SCSI: DA:1:00:00:00 DA:2:00:00:00 CD:4:00:00:00
25%
15.02.2012
of Figure 10. Figure 11 plots the Write IO function count for the KB range intervals. Figure 12 plots the Write IO function count for the MB range intervals. Figure 13 plots the Write IO function count
25%
26.01.2012
of Figure 10. Figure 11 plots the Write IO function count for the KB range intervals. Figure 12 plots the Write IO function count for the MB range intervals. Figure 13 plots the Write IO function count
25%
21.08.2012
.
The script has line numbers to make a discussion much easier. Any directive to Torque starts with #PBS
, such as line 12. Therefore, comments begin with ###
, such as line 2. Lines 22-24 load the Environment
25%
18.07.2013
buffered disk reads: 616 MB in
3.00 seconds = 205.03 MB/sec
$ hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 6292 MB in
2.00 seconds = 3153.09 MB/sec
If this were a spinning disk, you would also
25%
11.04.2016
/s wMB/s avgrq-sz ...
sdb 0.00 28.00 1.00 259.00 0.00 119.29 939.69 ...
Parallelism
Multiple computers can access enterprise storage, and multiple threads can access
25%
16.10.2012
6), and start stream blocking (line 7), which executes the command and waits for the response. Now, write the output to a variable (lines 9-12), close the stream (line 14), and send the response
24%
20.06.2012
/local
53G 29G 22G 57% /vnfs/usr/local
From the output, it can be seen that only 217MB of memory is used on the compute node for storing the local OS. Given that you can easily and inexpensively buy 8GB
24%
04.11.2011
-server 192.168.1.2;
filename "/pxelinux.0";
host node01 {
hardware ethernet 00:11:22:33:44:a0;
fixed-address 192.168.1.101;
}
host node01-bmc {
hardware ethernet 00:11:22:33:44:8d;
fixed-address 192
24%
11.04.2016
network adapters, one for administration and one for the web server. I gave the system 1GB memory, but it has not yet used more than 200MB.
Then, boot the image. You have several choices:
Add
