45%
30.11.2025
.
In most cases, 90 percent of a full backup will be identical to the previous full backup, so the full backup does not need to be sent to the backup server again. Instead, the backup server creates a backup
45%
30.11.2025
su
# echo 192.168.1.200 > /etc/hostname.e1000g0
In this example, e1000g0
is the primary network interface. The following command lists the network interfaces:
# ifconfig -a
You have to add ... 0
45%
30.11.2025
than 0 (Figure 3). If not, either the processor doesn't support the special commands, or the commands have been disabled in the computer's BIOS. Users with Intel processors can additionally check
45%
30.11.2025
: plug another memory leak
05 c90fc4c934ac7b024c1fc1813bb3cffb5333e18f lockdown: move writing of device uuid to client struct inside lockdownd_client_new()
06 f0487376671ffd6ac3fc121657f1fbd0acea3cb0
45%
30.11.2025
can exclude files of a certain size (e.g., those of 0MB). The Burp configuration language also provides two size parameters: min_file_size and max_file_size; for example:
min_file_size = 0 Mb
45%
30.11.2025
this writes an LVM label and some metadata to the PV.
The PV is divided up into units of the same size (4MB by default) known as physical extents (PEs). A PE is the smallest allocatable data volume. Figure 1
45%
30.11.2025
appliance (see the "Test Hardware" box) with eight fast disks in a RAID level 0 array with a stripe size of 64KB. The RAID is divided into an SSD array and an HDD array with identical partitions on both
45%
30.11.2025
patience and light scripting skills. PowerShell versions 1.0 and 2.0 have a somewhat limited ability to grab information from remote systems singly or in bulk. Therefore, you have to work around those
45%
30.11.2025
will be accepted through April 10, 2011. Look for more on the Contegix website http://www.contegix.com/.
Icinga v1.3.0 Released with Dual-Stack Support
By now
44%
30.11.2025
between Citrix and Microsoft is demonstrated by the availability of graphical management tools. Basic management tasks on the host system (Dom0
) can be handled using the Curses-based xcconsole and the xe
