17%
04.12.2024
. Further details for each change follow this summary.
If you automate the use of AIDE, you will definitely need to evaluate the program's return values. Like (virtually) any application, a return value of 0
17%
07.11.2011
.
Figure 1: By default, top shows the total load for all CPUs …
The program seems to be using 100 percent of the CPU. But appearances can be deceptive: The computer’s actual load is just 60 percent
17%
19.06.2013
..
Figure 1: CPU clock frequency over time (CC BY-SA 3.0 US).
Of course, you know the reason: Higher clocks, and thus temperatures, were not sustainable. That is not to say clock rates will not increase
17%
28.11.2023
with an Ethertype of 0x88e5 on the provider's network. Because MACsec works on Layer 2, it must be individually enabled for each interface.
Encryption Method
MACsec uses AES-GCM as the encryption algorithm
17%
08.06.2012
, “Hypertext Transfer Protocol,” which was finally standardized as HTTP 1.0 in May 1996.
Just three years later, HTTP 1.1 was standardized to reflect the increasing load on the web. The revised protocol reduced
17%
14.08.2017
has announced the OCI v1.0.0 run time and image specifications.
OCI is a cross-industry initiative to standardize technologies around Linux containers. Essentially, OCI seems to achieve the same goals
17%
05.02.2023
the following code admin.c:
#include
int main(int argc, char **argv)
{
printf("Hello World!");
return 0;
}
You can compile the source code with:
gcc -O0 admin.c -o admin
The -O0 entry switches off
17%
13.10.2020
, a
is the application speedup, n
is the number of processors, and p
is the “parallel fraction” of the application (i.e., the fraction of the application that is parallelizable), ranging from 0 to 1. Equations are nice
17%
02.02.2021
:
In Equation 1, a
is the application speedup, n
is the number of processors, and p
is the "parallel fraction" of the application (i.e., the fraction of the application that is parallelizable), ranging from 0
17%
07.04.2022
=physical
physicaldevice=eth1
address=192.168.2.100
Enabling logging of all HAast messages
Telling HAast about the management IP address of this node and the management IP address of the other node (so
