58%
25.09.2013
the code states should be good enough for caches up to 20MB. The Stream FAQ recommends you use a problem size such that each array is four times the sum of the caches (L1, L2, and L3). You can either change
58%
26.01.2025
/resources-tools/resources/enhanced-visibility-and-hardening-guidance-communications-infrastructure.
OpenMP 6.0 Released
The OpenMP Architecture Review Board (ARB) has released version 6.0 of the OpenMP API ... In the news: Hetzner Announces S3-Compatible Object Storage; Ongoing Cyberattack Prompts New CISA Guidance for Communications Infrastructure; OpenMP 6.0 Released; Open Source Development Improves
58%
25.09.2023
of the number of ports, the count, and the limit of the operation. The defaults are ports = 2, count = 6, and limit = 4, so the product, 2x6x4=48, is the total number of netcat operations.
The fourth and final
58%
17.05.2017
, 5 ) / ( 8, 5 ) }
DATA {
(0,0): 0, 1, 2, 3, 4,
(1,0): 5, 6, 7, 8, 9,
(2,0): 10, 11, 12, 13, 14,
(3,0): 15, 16, 17, 18, 19,
(4,0): 20, 21, 22, 23, 24,
(5,0): 25, 26, 27, 28, 29,
(6
58%
17.04.2017
.auxiliary.sniffer] INFO: Started sniffer with PID 9360 (interface=virbr0, host=192.168.122.10, pcap=/home/tscherf/cuckoo/cuckoo/storage/analyses/6/dump.pcap)
tcpdump: listening on virbr0, link-type EN10MB (Ethernet
58%
16.08.2018
correctly. This simple test gets the kernel version of a different node using the IP address of the other node.
$ pdsh -w 192.168.1.250 uname -r
192.168.1.250: 2.6.32-431.11.2.el6.x86_64
The -w option means
58%
03.12.2024
.9.0. The TensorFlow version is a bit old; 2.16.1 is the latest as of this writing, but I already had it installed. My Keras is also a bit old. I think Keras 3.6 is the latest, and my version isn't even 3.x. I haven
58%
17.06.2017
anywhere in the code. It could also be used for a numerical label. Column 6 was reserved for a continuation mark, so that lines that were longer than one line could be continued. The code began in column 7
58%
20.03.2014
": 2048,
07 "resolvers": ["192.168.111.254"],
08 "disks": [
09 {
10 "image_uuid": "1fc068b0-13b0-11e2-9f4e-2f3f6a96d9bc",
11 "boot": true,
12 "model": "virtio"
13 }
14 ],
15
58%
11.10.2016
to be commands. Knowing which mode you are in is one of the earliest aspects of Vi that needs to be mastered.
Figure 1 shows an image of Vi running in Normal mode on my Linux CentOS 6.8 desktop. At the bottom
