47%
30.11.2025
the older UFS filesystem rather than ZFS.
Built-In RAID
With FreeNAS, you can set up software RAID levels 0, 1, 3, and higher, but again, you need to be aware that hardware RAIDs are faster and safer ... Setting up your own NAS with FreeNAS 8.0.2
47%
30.11.2025
Manager (CLVM) is used to mount the shared storage.
Architecture
The two physical cluster nodes in this article each have four network cards: eth0
through eth3
. The first (eth0
), and third (eth2 ... 0
47%
30.11.2025
filesystem, if so desired [5]:
$ guestfish -N fs:ext3
When you call Guestfish with the new image,
$ guestfish -a
you are taken to a shell where you first need to enter run to toggle the system
47%
30.11.2025
from backup block#262144? <n> y
Checking OCFS2 filesystem in /dev/sda1:
label: backup
uuid: 31 18 de 29 69 f3 4d 95 a0 99 a7 23 ab 27 f5 04
number of blocks: 367486
47%
30.11.2025
server.examplenet.com (192.168.5.6): icmp_seq=2. time=0.344 ms
64 bytes from server.examplenet.com (192.168.5.6): icmp_seq=3. time=0.256 ms
^C
----server PING Statistics----
4 packets transmitted, 4
47%
30.11.2025
total = summary.values.inject(0) { |sum, i| sum += i }
12 puts "Found #{total} instances in the following states:"
13 summary.keys.sort.each do |s|
14 printf "%20s %d\n", s, summary[s]
15 end
16 puts
47%
30.11.2025
traffic normally unavailable because of layer 2 switching.
Arpspoof [3] is much simpler than ettercap for redirecting packets:
# arpspoof -i eth0 -t host
Specifying the interface is optional
47%
30.11.2025
've not been able to discover how enterprise environments are planning to cope with this problem.
Infos
SMBTA to be integrated with Samba 3.6 : http://samba.org/samba/ftp/pre/WHATSNEW-3-6-0pre1.txt ... 3
47%
30.11.2025
than 0 (Figure 3). If not, either the processor doesn't support the special commands, or the commands have been disabled in the computer's BIOS. Users with Intel processors can additionally check
47%
30.11.2025
endpoint1=192.168.80.0/24
07 endpoint2=192.168.2.0/24
08 action=requireinrequireout
09 auth1=computerpsk
10 auth1psk="test123"
11 qmsecmethods=esp:sha1-3des
12 qmpfs=dhgroup2
If you need
