Search

; 12 13 /* sendq: servers need a higher sendq as they send more data */ 14 sendq=2 megabytes; 15 }; Additionally, ircd.conf lacks a block that allows connections to other servers ... Running an IRC server might seem almost anachronistic, but the classic service from the early 1990s offers a huge amount of functionality with very little in the line of resources. In the daily grind

is as follows: tc filter add dev $DEV protocol ip parent 1:0 prio 100 u32 match ip $DIR 12.34.56.78 flowid 1:12 You'll be glad to know the filter's config is much simpler than the classes or the qdisc

, you can use the current package from Debian Sid [4], which is available there as version 0.19+20120328. After meeting these preconditions, you can start with a fresh Ubuntu 12.04 LTS server default

\ 02 --hostname=foo.bar.de --mac- address=00:40:26:CA:10:DD \ 03 --kopts="stage=test app=www" --ksmeta="stage=test app=www" 04 # cobbler system edit --name=foo --interface=eth0 --mac=00:40:26:CA

686 oprofile-0.9.5-4.fc12.i686 To profile the kernel, you need to tell OProfile where the kernel image is located with the --vmlinux option: opcontrol --setup --vmlinux=/usr/lib/debug/lib/ modules

Model"; 11 $work = "ebiz-tx"; 12 $node1 = "WebServer"; 13 $node2 = "AppServer"; 14 $node3 = "DBMServer"; 15 $think = 0.0 * 1e-3; # as per test system 16 $dtime = 2.2 * 1e-3; # dummy service time 17 18

at the output of uptime [1] on OS X: 13:03 up 2 days, 12:01, 2 users, load averages: 0.52 0.59 0.63 The uptime command displays the load average in its common form, averaging the last one, five, and 15 minutes

/0K /s] [4137 /0 iops] [eta 00m:06s] In the example, the first job is performing a sequential read, marked as r in square brackets, while Fio hasn't initialized the second job, marked as P

/sysconfig/network-scripts/ifcfg-eth0-e "s///" You need a similar approach with the Udev rules mentioned earlier. In this way, you can also replace the hostname so that it matches the name assigned during

. The following command tells the system the hex address of the code segment and the two data segments: add-symbol-file path/hello.ko 0xd8817000 -s .data 0xd88170e0 -s .bss 0xd8817294 Now you can set a breakpoint