30%
05.12.2016
), Kubernetes is written in Go and available under the Apache 2.0 license; the stable version when this issue was written was 1.3.
Figure 1: Kubernetes comes
30%
05.11.2018
nodes, and make sure to do this as a user and not as root.
3. To make life easier, use shared storage between the controller and the compute nodes.
4. Make sure the UIDs and GIDs are consistent
30%
13.12.2018
In previous articles, I examined some fundamental tools for HPC systems, including pdsh [1] (parallel shells), Lmod environment modules [2], and shared storage with NFS and SSHFS [3]. One remaining
30%
09.01.2013
://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 840 Series
Serial Number: S19HNSAD620517N
LU WWN Device Id: 5 002538 5a005092e
Firmware Version: DXT08B0Q
User Capacity: 120,034,123,776 bytes
30%
04.02.2013
3 and, in the current version 0.6.2, supports VNC and RDP – although with limited functionality in some cases. For example, you cannot transmit audio data or connect network drives over RDP
30%
19.11.2014
traffic over eth0, you can get an idea of network activity:
dstat -tn -N eth0 1 10
I added the time option (-t
) and the network stats option (-n
), then monitored the network device of interest (-N eth0
30%
21.08.2014
*
10 * daemon started successfully *
11 List of devices attached
12 015d8bed0d3c0814 device
If you use the commands from the SDK regularly, it makes sense to add its path, preferably like
30%
01.08.2019
.SEC_FLAG_MAXIMUM_ALLOWED)
Listing 3
ACL Error Message
root@addc-01:~# samba-tool gpo aclcheck -U administrator
Password for [EXAMPLE\administrator]:
ERROR: Invalid GPO ACL O:DAG:DAD:PAI(A;OICI;0x001f01ff;;;DA)(A;OICI;0x001
30%
05.12.2016
, but Debian and Ubuntu installations define max_binlog_size as 100MB. XtraBackup also wants to create a separate file for every InnoDB table, which is enabled by the innodb_file_per_table variable (Listing 3
30%
19.09.2019
= block_size * grid_size
# assuming x and y inputs are same length
for i in range(start, x.shape[0], stride):
out[i] = x[i] + y[i]
You can run the following code to use the function in Listing 1:
import numpy as np
n ... High-Performance Python 3
