18%
03.12.2024
used Python 3.8.10 – and a specific Python environment built for testing, which I’ll discuss. I don’t recommend using your base environment, although I’ve been known to do that. (It’s simple enough
18%
25.11.2012
distribution, so I’ll describe the approach on a more generic level on the basis of Red Hat’s and SUSE’s enterprise distributions (RHEL 6.2 and SLES 11 SP2). Admins have the choice between a completely manual
18%
07.02.2019
)),
copyout(b(s/4:3*s/4))
#pragma acc data copyin(a[0:size-1]),
copyout(b[s/4:3*s/4])
You can use reasonably complex expressions to determine the portion and size of the array to use
18%
28.11.2022
of alternative sources.
Listing 1
sensors Output
federico@ferenginar:~$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +42.5¡C (high = +70.0¡C)
(crit = +100.0¡C
18%
05.08.2024
, as in Python [3] or Node [4].
Recent books have been published about writing shell commands in Rust [5], Python [6], Node.js [7], and even Go [8], and it is into this last language's interesting performance
18%
25.09.2023
Virtual local area network (VLAN) tagging on an IEEE 802.3 network is defined by the 802.1Q standard, which makes it possible to separate traffic from different logical networks within a physical ... LAN data transmission has evolved from the original IEEE 802.3 standard to virtual extensible LAN (VXLAN) technology and finally to today's Generic Network Virtualization Encapsulation (GENEVE
18%
16.05.2013
and supplies (e.g., eBay/PayPal's GO 3 token, known as a "security key"). At the heart of two-factor authentication is the Identikey server, which – in the basic version – comprises a RADIUS interface
18%
20.05.2014
)]: Done 1 out of 181 | elapsed: 0.0s remaining: 4.5s
[Parallel(n_jobs=2)]: Done 198 out of 1000 | elapsed: 1.2s remaining: 4.8s
[Parallel(n_jobs=2)]: Done 399 out of 1000 | elapsed: 2.3
18%
20.03.2023
wrote on Lmod back in 2018, you will see a discussion about the three commands to run:
$ sudo ln -s /usr/local/lmod/lmod/init/profile /etc/profile.d/z00_lmod.sh
$ sudo ln -s /usr
18%
13.12.2018
disk reads: 1306 MB in 3.00 seconds = 434.77 MB/sec
federico@cybertron:~$ sudo hdparm -W /dev/sdb
/dev/sdb:
write-caching = 1 (on)
federico@cybertron:~$ sudo hdparm -W 0 /dev/sdb
/dev/sdb:
write
