18%
09.06.2018
directly [1] and from SerNet [2]. (At the time of print, versions 4.6 to 4.8 were available.) If you always want to use the latest version (e.g., the pre-release or release candidate), you can compile Samba
18%
04.10.2018
Essentials Dashboard simplifies the procedure, these features are not available in larger organizations.
How ADManager Plus Works
ADManager Plus 6.6, from ManageEngine (Zoho Corporation's IT management
18%
25.03.2020
replied to say it would slightly decrease.
What areas are finding the highest rate of open source adoptions? According to the survey respondents, those areas are:
Security – with 52 percent
18%
12.09.2013
Thorsten Scherf
52 - initial version
Running
rpmbuild -ba custom-selinux-policy
finally gives you the source and binary RPMs. You need the appropriate development tools in place
18%
03.02.2022
is made possible because cron only checks for a date format and not that the date of the task is legitimate. The crontab date specification for CronRAT is 52 23 31 2 3, which would generate a runtime error
18%
12.05.2014
).
The requirements for EncFS are pretty simple:
FUSE version 2.6 or newer.
rlog – C++ logging library.
OpenSSL versions 0.9.6 through 0.9.8 (other version are untested).
boost – a C++ utility library
18%
16.08.2018
correctly. This simple test gets the kernel version of a different node using the IP address of the other node.
$ pdsh -w 192.168.1.250 uname -r
192.168.1.250: 2.6.32-431.11.2.el6.x86_64
The -w option means
18%
09.01.2013
difficulties because they require vendor-specific I/O control commands. Check the smartmontools page for more details on your specific card.
For this article, I used a freshly installed CentOS 6.4 [3
18%
28.06.2011
-get. Once the images are installed on the cloud controller, the button changes to Installed
with a How to run?
link (Figure 6). Click the link to see the instructions in a pop-up window
18%
08.07.2018
using the IP address of the other node.
$ pdsh -w 192.168.1.250 uname -r
192.168.1.250: 2.6.32-431.11.2.el6.x86_64
The -w
option means that the IP address of the target’s node(s) is specified
