17%
25.03.2020
] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdd1[5] sde1[4] sdc1[2] sdb1[1] nvme0n1p1[0](J)
20508171264 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/3] [UU
17%
21.01.2020
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Next, verify that the RAID configuration has been created (Listing 3). You will immediately notice that the array initializes
17%
14.11.2013
of an uncorrectable error by factors of 9-400.
Uncorrectable errors following a correctable error are still small at 0.1%-2.3% per year.
+ The incidence of correctable errors increases with age
17%
21.01.2021
. The initial processor speed was 300MHz. Future processors used 450, 600, and even 675MHz. Similar to the T3D, the T3E could scale from 8 to 2,176 PEs, and each PE had between 64MB and 2GB of memory. The T3D
17%
03.02.2022
eMMC (not populated)
Network
1x Topaz networking switch
2x GbE LAN
1x Ethernet WAN
1x MiniPCIe slot
USB
1x USB 3.0
17%
02.08.2021
.858993
0.000076
0.858993
0.000099
0.660764
0.000107
0.613567
64
0.000099
5.286114
0.000145
3.616815
0.000153
3
17%
18.07.2013
mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
32 Cycle time: min=120ns recommended=120ns
33 PIO: pio0 pio1 pio2 pio3 pio4
34 Cycle time: no flow control=120
17%
30.11.2025
.6 (5-12-2012)
Filesystems and versions: ext2, ext3, ext4 (each with e2fsprogs 1.41.14), Btrfs (btrfsprogs 0.19), XFS (xfsprogs 3.1.6), ReiserFS (3.6.21), ZFS (0.6.0-rc8).
Operating and Filesystems
16%
07.01.2013
selected. In Fedora and RHEL, this setup gives you a minimal, text-based installation (about 200 packages occupying 600MB). The names and scopes of the packages for Red Hat-based distributions are listed
16%
30.11.2025
0
23 20120310 13:39:20 sdb 0 0 0 1 3 17 12 0 27 8 1 sda 0 0 0 0 0 0 0 0 0 0 0
24 20120310 13:39:30 sdb 0 0 0 0 0 0 0 0 0 0 0 sda 0 0 0 0 0 0 0 0 0 0 0
25 20120310 13:39:40 sdb 0 0 0 0 0 0 0 0 0 0 0
