41%
17.04.2017
to occur every night of the week at 3:00am. This involved backing up an entire Ubuntu installation in a bootable image on network-attached storage (NAS) in the local network (Figure 3). When backing up
41%
07.10.2014
. The second number is percent CPU load from the system (0.3%sy), and the next is percentage of jobs that are "nice" [2] (0.0%ni). After that, Top lists percent overall CPU time idle (86.3%id; four real cores
41%
18.07.2013
buffered disk reads: 616 MB in
3.00 seconds = 205.03 MB/sec
$ hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 6292 MB in
2.00 seconds = 3153.09 MB/sec
If this were a spinning disk, you would also
41%
03.08.2023
in 2014. At the time of writing, the available Kea versions were 2.2.0 (July 2022, Current-Stable) and 2.3.6 (March 2023, Experimental-Development). Most distributions have prebuilt Kea packages
41%
22.08.2011
systems is John the Ripper (John). John is a free tool from Openwall. System administrators should use John to perform internal password audits. It’s a small (<1MB) and simple-to-use password
41%
11.04.2016
-fastcgi are running, as expected.
Listing 1
Process List
root 589 0.0 0.3 142492 3092 ? Ss 20:35 0:00 nginx: master process
/usr/sbin/nginx -g daemon on; master_process on;
www
41%
31.10.2025
, the problem of writing a dump to an MD RAID or transferring larger kernel images ultimately proved unfixable.
Further attempts with Netdump (Red Hat) or Diskdump [3] in 2002 and 2004 also had only moderate
41%
11.02.2016
DestinationSizeChange 41943106 (40.0 MB)
Another view of the file statistics lists which file effected the change:
# gunzip -c /mnt/backup/rdiff-backup-data/file_statistics.\
2015-03-15T10\:44\:06+01\:00.data.gz | awk '$2
41%
29.09.2020
sitting at less than 50MB (and using less than half the RAM of a standard cluster) the binary that runs K3s is a sight to behold and well worth getting your hands on. Especially when it's deemed production
41%
03.12.2015
.0/24 !10.0.3.0/24
root@ubuntu:~# ps -eaf | grep dnsmas
lxc-dns+ 1047 1 0 18:24 ? 00:00:00 dnsmasq -u lxc-dnsmasq --strict-order --bind-interfaces --pid-file=/run/lxc/dnsmasq.pid --conf
