31%
15.08.2016
Zodiac FX as an alternative for testing OpenFlow configurations on real hardware. Zodiac FX is a four-port, 100MB switch controlled by an Atmel CPU. The Zodiac FX switch works with the OpenFlow protocol
31%
14.08.2017
:31 FS_scan.csv
$ gzip -9 FS_scan.csv
$ ls -lsah FS_scan.csv.gz
268K -rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip with the -9
31%
09.10.2017
snaps, you need to install the snapcraft
package:
$ apt install snapcraft
After a little more than 8MB of files are installed, you can start creating a snap with an init command (Figure 6), which pulls
31%
21.01.2021
and 32MB of DRAM memory. The J90 supported up to 32 vector processors at 100MHz and up to 4GB of main memory. Each processor was two chips: one for the scalar portion of the architecture and the second
31%
11.02.2016
there are normally two. The size of these two files influences the speed of write access to InnoDB. This value was far too small for many years (5MB). The new default values in MySQL 5.6 take this into account
31%
02.10.2017
than 8MB of files are installed, youcan start creating a snap with an init
command (Figure 6), which pulls in a template.
Figure 6: Some helpful output
31%
14.06.2017
-rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip
with the -9
option (i.e., maximum compression), the resulting file is 268KB. The .gz
31%
20.03.2014
for [6], or you may see degraded performance for a setup that externally appears perfectly aligned.
You can check the properties of your first disk by looking up /sys
31%
29.09.2020
, "Kubernetes k3s Lightweight Distro" [6], which discusses using the magically tiny K3s within Internet of Things (IoT) applications.
The name of K3s came from Kubernetes' often abbreviated form K8s; according
31%
19.02.2013
to a 100Mb network, the path through the faster router wins. Where the paths are equivalent, the administrator can manually add a weighting value to the configuration, which is then reflected in the LSA
